How to replace the Rack and Pinion Boot on 2007 Mercedes-Benz C230?

Unscrew the wheel bolts, lift the vehicle on jack stands and remove the wheel. Take off engine splash shields and 4MATIC heat shield. Loosen the tie-rod end, and inspect the power steering fluid, and the rack and pinion boot. Install clamps, reassemble, and test front end.

Genuine 2007 Mercedes-Benz C230 Rack and Pinion Boot

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Rack and Pinion Boots found

View related parts
2007 Mercedes-Benz C230 Tie Rod Boot
Part Number: 171-463-00-96
$36.60 MSRP: $51.00
You Save: $14.40 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Boot; Tie Rod Boot
- Replaces: 203-463-02-96
- Item Weight: 0.60 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 171-463-00-96
- Warranty: This genuine part is guaranteed by Mercedes-Benz's factory warranty.
More Info
Fits the following 2007 Mercedes-Benz C230 Submodels:
- Kompressor, Sport | 4 Cyl 1.8 L GAS, 4 Cyl 2.3 L GAS, 6 Cyl 2.5 L FLEX, 6 Cyl 2.5 L GAS
View related parts
2007 Mercedes-Benz C230 Boot
Part Number: 211-463-03-96
$42.00 MSRP: $59.00
You Save: $17.00 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 211-463-03-96
- Warranty: This genuine part is guaranteed by Mercedes-Benz's factory warranty.
Fits the following 2007 Mercedes-Benz C230 Submodels:
- Kompressor, Sport | 4 Cyl 1.8 L GAS, 6 Cyl 2.5 L FLEX, 6 Cyl 2.5 L GAS

2007 Mercedes-Benz C230 Rack and Pinion Boot Parts Q&A

Q: How to replace the Rack and Pinion Boot on 2007 Mercedes-Benz C230?
A: Unscrew the wheel bolts, lift the vehicle on jack stands and remove the wheel. Take off engine splash shields and 4MATIC heat shield. Loosen the tie-rod end, and inspect the power steering fluid, and the rack and pinion boot. Install clamps, reassemble, and test front end.