How to remove and install the valve cover in the Four-cylinder engines on 2007 Mercedes-Benz C350?

Disconnecting the negative terminal of the battery, the engine cover, ignition coils, spark plugs, and PCV hose should be disconnected in order to remove the valve cover. Disassemble the camshaft sensor, disconnect the valve cover bolts and loosen. Wipe down surfaces and examine gaskets. Installation The bolts should be tightened in a series, and oil leaks should be checked.

Genuine 2007 Mercedes-Benz C350 Valve Cover

Cylinder Head Cover

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Valve Covers found

View related parts
2007 Mercedes-Benz C350 Front Cover
Part Number: 272-015-01-01
$66.00 MSRP: $92.00
You Save: $26.00 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover, Front Cover, Valve Cover
- Replaced by: 272-015-06-01
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 272-015-01-01
- Warranty: This genuine part is guaranteed by Mercedes-Benz's factory warranty.
Fits the following 2007 Mercedes-Benz C350 Submodels:
- 4Matic, Luxury, Sport | 6 Cyl 3.5 L GAS
View related parts
2007 Mercedes-Benz C350 Front Cover
Part Number: 272-015-02-01
$69.60 MSRP: $97.00
You Save: $27.40 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover, Front Cover, Valve Cover
- Replaced by: 272-015-05-01
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 272-015-02-01
- Warranty: This genuine part is guaranteed by Mercedes-Benz's factory warranty.
Fits the following 2007 Mercedes-Benz C350 Submodels:
- 4Matic, Luxury, Sport | 6 Cyl 3.5 L GAS

2007 Mercedes-Benz C350 Valve Cover Parts Q&A

Q: How to remove and install the valve cover in the Four-cylinder engines on 2007 Mercedes-Benz C350?
A: Disconnecting the negative terminal of the battery, the engine cover, ignition coils, spark plugs, and PCV hose should be disconnected in order to remove the valve cover. Disassemble the camshaft sensor, disconnect the valve cover bolts and loosen. Wipe down surfaces and examine gaskets. Installation The bolts should be tightened in a series, and oil leaks should be checked.