How to check and replace engine mounts on Mercedes-Benz C240?

There are three power train mounts: left and right engine mounts attached to the engine block and subframe, and a rear mount attached to the transmission and subframe. During the check, the engine must be raised slightly to remove the weight from the mounts. To do this, raise the vehicle and support it securely on jackstands, then remove the front wheels and tires. Position two jacks, one under the crankshaft pulley and the other under the transmission bellhousing, using a block of wood between the jack head and the crankshaft pulley or bellhousing, and carefully raise the engine/transmission just enough to take the weight off the mounts. The safest method is to use an engine support cradle that raises the engine from above, which can be rented at most tool rental shops. Check the mounts for any cracks, hardened rubber, or separation from the metal plates, as the rubber may sometimes split down the center. Also, check for relative movement between the mount brackets and the engine or subframe by using a large screwdriver or prybar to attempt to move the mounts; if movement is noted, lower the engine and tighten the mount fasteners. To replace the mounts, disconnect the cable from the negative terminal of the battery, then raise the vehicle and support it securely on jackstands. Remove the engine splash shield, then take out the bolts holding the engine mount to the subframe. Raise the engine until the engine mount bracket clears the subframe, then remove the bracket-to-mount bolt from above. Remove one engine mount and replace it with a new one, then replace the other front mount. Install the bolts, lower the engine, and tighten the bolts to the specified torque.

How to secure front engine mounts on Mercedes-Benz C240?

This procedure is essentially the same as for the four-cylinder engine, utilizing the outlined steps while applying the specified torque values. The front mounts feature an upper mounting bolt that secures them to the engine bracket and a lower bolt that fastens them to the subframe.

Genuine Mercedes-Benz C240 Engine Mount

Engine Motor Mount

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

13 Engine Mounts found

View related parts
Mercedes-Benz C240 Lift Bracket
Part Number: 112-223-03-41
$7.20 MSRP: $10.00
You Save: $2.80 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Suspension Eye
- Replaces: 112-223-01-41
- Warranty: This genuine part is guaranteed by Mercedes-Benz's factory warranty.
Fits the following Vehicles:
- 2001-2005 Mercedes-Benz C240 | 4Matic, Base | 6 Cyl 2.6 L GAS
View related parts
Mercedes-Benz C240 Lift Bracket
Part Number: 112-223-04-41
$4.51 MSRP: $6.25
You Save: $1.74 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Suspension Eye
- Replaces: 112-223-02-41
- Warranty: This genuine part is guaranteed by Mercedes-Benz's factory warranty.
Fits the following Vehicles:
- 2001-2005 Mercedes-Benz C240 | 4Matic, Base | 6 Cyl 2.6 L GAS
View related parts
Mercedes-Benz C240 Support Bracket
Part Number: 112-223-51-04
$32.33 MSRP: $44.50
You Save: $12.17 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Engine Support
- Warranty: This genuine part is guaranteed by Mercedes-Benz's factory warranty.
Fits the following Vehicles:
- 2003-2005 Mercedes-Benz C240 | 4Matic, Base | 6 Cyl 2.6 L GAS
View related parts
Mercedes-Benz C240 Rear Mount Support
Part Number: 203-242-05-01
$64.80 MSRP: $90.00
You Save: $25.20 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Engine Support; Rear Support
- Warranty: This genuine part is guaranteed by Mercedes-Benz's factory warranty.
Fits the following Vehicles:
- 2001-2005 Mercedes-Benz C240 | 4Matic, Base | 6 Cyl 2.6 L GAS
View related parts
Mercedes-Benz C240 Transmission Mount
Part Number: 203-240-02-18-64
$90.00 MSRP: $125.00
You Save: $35.00 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rubber Bushing; Bracket, Rear Mount, Transmission Mount
- Replaces: 203-240-02-18
- Warranty: This genuine part is guaranteed by Mercedes-Benz's factory warranty.
Fits the following Vehicles:
- 2003-2005 Mercedes-Benz C240 | 4Matic, Base | 6 Cyl 2.6 L GAS
View related parts
Mercedes-Benz C240 Support Bracket
Part Number: 112-223-52-04
$84.00 MSRP: $117.00
You Save: $33.00 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Engine Support
- Warranty: This genuine part is guaranteed by Mercedes-Benz's factory warranty.
Fits the following Vehicles:
- 2003-2005 Mercedes-Benz C240 | 4Matic, Base | 6 Cyl 2.6 L GAS
View related parts
Mercedes-Benz C240 Rear Insulator
Part Number: 212-240-04-18
$87.60 MSRP: $122.00
You Save: $34.40 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Engine Mounting
- Replaces: 220-240-02-18, 220-240-18-18, 220-240-05-18
- Warranty: This genuine part is guaranteed by Mercedes-Benz's factory warranty.
Fits the following Vehicles:
- 2001-2005 Mercedes-Benz C240 | 4Matic, Base | 6 Cyl 2.6 L GAS
View related parts
Mercedes-Benz C240 Rear Mount Support
Part Number: 203-240-05-02
$110.40 MSRP: $154.00
You Save: $43.60 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Engine Support
- Replaces: 203-240-02-02
- Warranty: This genuine part is guaranteed by Mercedes-Benz's factory warranty.
Fits the following Vehicles:
- 2003-2005 Mercedes-Benz C240 | 4Matic, Base | 6 Cyl 2.6 L GAS
View related parts
Mercedes-Benz C240 Support Bracket
Part Number: 112-223-20-04
$78.08 MSRP: $154.00
You Save: $75.92 (50%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Engine Support; Bracket, Mount Bracket, Support Bracket
- Warranty: This genuine part is guaranteed by Mercedes-Benz's factory warranty.
Fits the following Vehicles:
- 2001-2005 Mercedes-Benz C240 | 4Matic, Base | 6 Cyl 2.6 L GAS
View related parts
Mercedes-Benz C240 Front Mount
Part Number: 203-241-11-13-64
$163.20 MSRP: $228.00
You Save: $64.80 (29%)
ADD TO CART
Product Specifications
- Other Name: Rubber Bushing; Front Mount, Motor Mount, Mount
- Replaces: 202-240-34-17, 203-241-04-13, 203-241-11-13
- Warranty: This genuine part is guaranteed by Mercedes-Benz's factory warranty.
Fits the following Vehicles:
- 2001-2005 Mercedes-Benz C240 | 4Matic, Base | 6 Cyl 2.6 L GAS
View related parts
Mercedes-Benz C240 Front Mount
Part Number: 203-240-16-17
$166.80 MSRP: $232.00
You Save: $65.20 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rubber Mounting; Mount
- Position: Front
- Warranty: This genuine part is guaranteed by Mercedes-Benz's factory warranty.
Fits the following Vehicles:
- 2003-2005 Mercedes-Benz C240 | 4Matic, Base | 6 Cyl 2.6 L GAS
View related parts
Mercedes-Benz C240 Rear Mount Insulator
Part Number: 203-224-01-05
Product Specifications
- Other Name: Console
- Position: Rear
- Warranty: This genuine part is guaranteed by Mercedes-Benz's factory warranty.
Fits the following Vehicles:
- 2003-2005 Mercedes-Benz C240 | 4Matic, Base | 6 Cyl 2.6 L GAS
View related parts
Mercedes-Benz C240 Support Bracket
Part Number: 112-223-21-04
Product Specifications
- Other Name: Engine Support; Bracket, Mount Bracket
- Warranty: This genuine part is guaranteed by Mercedes-Benz's factory warranty.
Fits the following Vehicles:
- 2001-2005 Mercedes-Benz C240 | 4Matic, Base | 6 Cyl 2.6 L GAS

Mercedes-Benz C240 Engine Mount

Every OEM part goes through strict quality checks. The checks keep you safe and make Engine Mount tough. They keep performance the same as your original parts. If your Mercedes-Benz C240 needs OEM parts, visit our catalog. You will find extensive genuine Mercedes-Benz C240 parts. We offer a wide selection at competitive prices, and with clear fit details and simple guidance, choosing what you need is effortless. Each of our parts has a manufacturer's warranty. You will like our simple return policy. We pack and ship fast, and you get your order quickly. Shopping here feels easy and enjoyable.

Mercedes-Benz C240 Engine Mount Parts and Q&A

Lift Bracket
112-223-03-41
Q: How to check and replace engine mounts on Mercedes-Benz C240?
A:
There are three power train mounts: left and right engine mounts attached to the engine block and subframe, and a rear mount attached to the transmission and subframe. During the check, the engine must be raised slightly to remove the weight from the mounts. To do this, raise the vehicle and support it securely on jackstands, then remove the front wheels and tires. Position two jacks, one under the crankshaft pulley and the other under the transmission bellhousing, using a block of wood between the jack head and the crankshaft pulley or bellhousing, and carefully raise the engine/transmission just enough to take the weight off the mounts. The safest method is to use an engine support cradle that raises the engine from above, which can be rented at most tool rental shops. Check the mounts for any cracks, hardened rubber, or separation from the metal plates, as the rubber may sometimes split down the center. Also, check for relative movement between the mount brackets and the engine or subframe by using a large screwdriver or prybar to attempt to move the mounts; if movement is noted, lower the engine and tighten the mount fasteners. To replace the mounts, disconnect the cable from the negative terminal of the battery, then raise the vehicle and support it securely on jackstands. Remove the engine splash shield, then take out the bolts holding the engine mount to the subframe. Raise the engine until the engine mount bracket clears the subframe, then remove the bracket-to-mount bolt from above. Remove one engine mount and replace it with a new one, then replace the other front mount. Install the bolts, lower the engine, and tighten the bolts to the specified torque.
Lift Bracket
112-223-04-41
Q: How to secure front engine mounts on Mercedes-Benz C240?
A:
This procedure is essentially the same as for the four-cylinder engine, utilizing the outlined steps while applying the specified torque values. The front mounts feature an upper mounting bolt that secures them to the engine bracket and a lower bolt that fastens them to the subframe.

Related Mercedes-Benz C240 Parts

Browse by Year

2005 Engine Mount 2004 Engine Mount 2003 Engine Mount 2002 Engine Mount 2001 Engine Mount