Raise the window, then remove the door trim panel and watershield. Remove the left-hand radio speaker on models with dual door speakers. Detach the door airbag. Free the weatherstripping from its clips around the lock mechanism. Remove the lock cylinder retaining screw from the handle, pull the lock cylinder partway out, disengage it from the latch, and then remove it completely. For the outside handle, remove the lock cylinder, slide the door handle rearward to disengage it from the bearing bracket, and pull it straight out of the holes. For the door latch, drill out the rivets securing the rear power window lift rail and detach it. Disconnect the door latch cable and free it from its retainers, then remove the three screws securing the latch to the door and take out the latch assembly. Disconnect the electrical connectors from the latch mechanism. Installation is the reverse of removal for all components.