How to remove, overhaul, and refit the Wheel Hub assembly on Mercedes-Benz 190E?

The hub assembly should only be removed if the bearings need to be renewed, as the hub bearing inner race is a press-fit on the steering knuckle, and removal may damage the bearings. A press is necessary for dismantling and rebuilding the assembly; if unavailable, a large bench vice and spacers like large sockets can be used as substitutes. The inner races of the bearings are an interference fit on the hub, and if the inner race remains on the hub during pressing, a knife-edged bearing puller will be needed for removal. Begin by removing the front brake disc and, for models with ABS, the front wheel sensor. Tap out the grease cap from the hub's center, replacing it if damaged. Remove the radio interference spring if present, then slacken the hub nut clamp bolt and hub nut, removing the thrust washer if applicable. Withdraw the front hub assembly from the steering knuckle, using a puller if it is a tight fit. If the inner bearing race stays on the steering knuckle, use a knife-edge type puller to remove it, then slide off the hub oil seal and inspect the steering knuckle axle shaft for damage, renewing if necessary. For overhaul, remove the inner race from the outer bearing, carefully lever out the oil seal from the rear of the hub assembly, and tap the outer bearing inner race out using a hammer and punch. Remove the inner bearing outer race similarly, clean the hub thoroughly, and check for wear or damage, renewing as needed. During reassembly, apply a light coating of grease to the bearing outer race and hub contact surfaces, ensuring the inner bearing outer race is pressed fully into position squarely. Fit the outer bearing inner race and the inner race to the inner bearing, then install the oil seal with its sealing lip facing inwards. Pack the hub assembly with grease and fit the inner race to the outer bearing. For refitting, grease the hub rear oil seal lip and locate the hub assembly onto the steering knuckle shaft, then fit the thrust washer and screw on the hub nut. Rotate the hub assembly while using the hub nut to press it onto the steering knuckle axle, adjusting the hub bearing endfloat and tightening the hub nut clamp bolt to the specified torque. After setting the endfloat, remove the dial gauge, fit the radio interference spring if applicable, tap the grease cap into position, and refit the brake disc and ABS front wheel sensor if necessary.

Genuine Mercedes-Benz Wheel Hub

Wheel Axle Hub

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

62 Wheel Hubs found

View related parts
Mercedes-Benz Front Hub
Part Number: 246-337-01-45
$68.40 MSRP: $95.00
You Save: $26.60 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Flange; Front Hub
Fits the following Mercedes-Benz Models:
- B Electric Drive | 2015 | Base | BATTERY EV (EV/BEV)
- B250e | 2016-2017 | Base | BATTERY EV (EV/BEV)
- CLA250 | 2014-2019 | 4Matic, Base | 4 Cyl 2.0 L FLEX, 4 Cyl 2.0 L GAS
- CLA45 AMG | 2014-2019 | 4Matic | 4 Cyl 2.0 L GAS
- GLA250 | 2015-2020 | 4Matic, Base | 4 Cyl 2.0 L FLEX, 4 Cyl 2.0 L GAS
- GLA45 AMG | 2015-2019 | 4Matic | 4 Cyl 2.0 L GAS
View More
View related parts
Mercedes-Benz Hub & Bearing Assembly
Part Number: 129-980-04-16
$5.25 MSRP: $7.25
You Save: $2.00 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Replaced by: 001-990-38-50
Fits the following Mercedes-Benz Models:
- 300D | 1990-1993 | 2.5 | 5 Cyl 2.5 L DIESEL
- 300E | 1990-1993 | 2.6, 2.8, 4Matic, Base | 6 Cyl 2.6 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.2 L GAS
- 400E | 1992-1993 | Base | 8 Cyl 4.2 L GAS
- 500E | 1992-1993 | Base | 8 Cyl 5.0 L GAS
- 500SL | 1990-1993 | Base | 8 Cyl 5.0 L GAS
- E300 | 1995 | Base | 6 Cyl 3.0 L DIESEL
- E320 | 1994-1995 | Base | 6 Cyl 3.2 L GAS
- E420 | 1994-1995 | Base | 8 Cyl 4.2 L GAS
- E500 | 1994 | Base | 8 Cyl 5.0 L GAS
- SL320 | 1994-1997 | Base | 6 Cyl 3.2 L GAS
View More
View related parts
Mercedes-Benz Hub
Part Number: 203-357-00-08
$94.80 MSRP: $132.00
You Save: $37.20 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hub
- Replaced by: 203-357-01-08
Fits the following Mercedes-Benz Models:
- C230 | 2002-2007 | Kompressor, Sport | 4 Cyl 1.8 L GAS, 4 Cyl 2.3 L GAS, 6 Cyl 2.5 L FLEX, 6 Cyl 2.5 L GAS
- C240 | 2001-2005 | 4Matic, Base | 6 Cyl 2.6 L GAS
- C280 | 2006-2007 | 4Matic, Luxury | 6 Cyl 3.0 L GAS
- C32 AMG | 2002-2004 | Base | 6 Cyl 3.2 L GAS
- C320 | 2001-2005 | 4Matic, Base | 6 Cyl 3.2 L FLEX, 6 Cyl 3.2 L GAS
- C350 | 2006-2007 | 4Matic, Luxury, Sport | 6 Cyl 3.5 L GAS
- C55 AMG | 2005-2006 | Base | 8 Cyl 5.5 L GAS
- CLK320 | 2005 | Base | 6 Cyl 3.2 L GAS
- CLK500 | 2003-2006 | Base | 8 Cyl 5.0 L GAS
- CLK55 AMG | 2004-2006 | Base | 8 Cyl 5.5 L GAS
View More
View related parts
Mercedes-Benz Hub
Part Number: 210-357-06-08
$84.00 MSRP: $117.00
You Save: $33.00 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Flange; Hub
Fits the following Mercedes-Benz Models:
- E320 | 1998-2003 | 4Matic, Base | 6 Cyl 3.2 L GAS
View related parts
Mercedes-Benz Front Hub
Part Number: 163-334-01-10
$116.40 MSRP: $162.00
You Save: $45.60 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hub; Front Hub
- Replaces: 163-334-00-10
Fits the following Mercedes-Benz Models:
- ML320 | 1998-2003 | Base | 6 Cyl 3.2 L GAS
- ML350 | 2003-2005 | Base | 6 Cyl 3.7 L GAS
- ML430 | 1999-2001 | Base | 8 Cyl 4.3 L GAS
- ML500 | 2002-2005 | Base | 8 Cyl 5.0 L GAS
- ML55 AMG | 2000-2003 | Base | 8 Cyl 5.5 L GAS
View More
View related parts
Mercedes-Benz Hub
Part Number: 129-357-09-08
$96.00 MSRP: $134.00
You Save: $38.00 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Flange; Hub
Fits the following Mercedes-Benz Models:
- CLK55 AMG | 2001-2002 | Base | 8 Cyl 5.5 L GAS
View related parts
Mercedes-Benz Wheel Hub
Part Number: 222-357-00-08
$120.00 MSRP: $167.00
You Save: $47.00 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rear-Axle Wheel Flange; Rear Hub
- Position: Rear
Fits the following Mercedes-Benz Models:
- S450 | 2018-2020 | 4Matic, Base | 6 Cyl 3.0 L GAS
- S550 | 2014-2017 | 4Matic, Base | 8 Cyl 4.7 L GAS
- S550e | 2015-2017 | Base | 6 Cyl 3.0 L PLUG-IN HYBRID EV-GAS (PHEV)
- S560 | 2018-2021 | 4Matic, Base | 8 Cyl 4.0 L GAS
- S560e | 2019-2020 | Base | 6 Cyl 3.0 L PLUG-IN HYBRID EV-GAS (PHEV)
- S600 | 2015-2017 | Base | 12 Cyl 6.0 L GAS
- S63 AMG | 2018-2020 | 4Matic | 8 Cyl 4.0 L GAS
- S65 AMG | 2018-2020 | Base | 12 Cyl 6.0 L GAS
View More
View related parts
Mercedes-Benz Front Hub
Part Number: 164-356-02-01
$133.20 MSRP: $185.00
You Save: $51.80 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Wheel Hub; Front Hub, Hub
- Replaces: 164-330-01-25, 164-356-01-01
Fits the following Mercedes-Benz Models:
- GL320 | 2007-2009 | Bluetec 4Matic, CDI | 6 Cyl 3.0 L DIESEL
- GL350 | 2010-2012 | Bluetec 4Matic | 6 Cyl 3.0 L DIESEL
- GL450 | 2007-2012 | Base | 8 Cyl 4.7 L GAS
- GL550 | 2008-2012 | Base | 8 Cyl 5.5 L GAS
- ML320 | 2007-2009 | Bluetec 4Matic, CDI | 6 Cyl 3.0 L DIESEL
- ML350 | 2006-2011 | 4Matic, Base, Bluetec 4Matic | 6 Cyl 3.0 L DIESEL, 6 Cyl 3.5 L GAS
- ML450 | 2010-2011 | Hybrid 4Matic | 6 Cyl 3.5 L FULL HYBRID EV-GAS (FHEV)
- ML500 | 2006-2007 | Base | 8 Cyl 5.0 L GAS
- ML550 | 2008-2011 | Base | 8 Cyl 5.5 L GAS
- ML63 AMG | 2007-2011 | Base | 8 Cyl 6.3 L GAS
View More
View related parts
Mercedes-Benz Rear Hub & Bearing
Part Number: 246-334-00-06-64
$133.20 MSRP: $185.00
You Save: $51.80 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Wheel Bearing; Hub & Bearing, Hub Assembly, Rear Hub Bearings
- Replaces: 246-334-00-06
Fits the following Mercedes-Benz Models:
- B Electric Drive | 2015 | Base | BATTERY EV (EV/BEV)
- B250e | 2016-2017 | Base | BATTERY EV (EV/BEV)
- CLA250 | 2014-2019 | 4Matic, Base | 4 Cyl 2.0 L FLEX, 4 Cyl 2.0 L GAS
- CLA45 AMG | 2014-2019 | 4Matic | 4 Cyl 2.0 L GAS
- GLA250 | 2015-2020 | 4Matic, Base | 4 Cyl 2.0 L FLEX, 4 Cyl 2.0 L GAS
- GLA45 AMG | 2015-2019 | 4Matic | 4 Cyl 2.0 L GAS
View More
View related parts
Mercedes-Benz Front Hub
Part Number: 211-357-05-08
$136.80 MSRP: $190.00
You Save: $53.20 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Flange; Front Hub, Hub, Rear Hub
- Replaces: 211-357-04-08, 211-357-03-08
Fits the following Mercedes-Benz Models:
- C63 AMG | 2008-2011 | Base | 8 Cyl 6.3 L GAS
- CL550 | 2007-2014 | 4Matic, Base | 8 Cyl 4.7 L GAS, 8 Cyl 5.5 L GAS
- CL600 | 2007-2014 | Base | 12 Cyl 5.5 L GAS
- CL63 AMG | 2008-2014 | Base | 8 Cyl 5.5 L GAS, 8 Cyl 6.3 L GAS
- CLK63 AMG | 2008 | Base, Black Series | 8 Cyl 6.3 L GAS
- CLS400 | 2015-2017 | 4Matic, Base | 6 Cyl 3.0 L GAS
- CLS500 | 2006 | Base | 8 Cyl 5.0 L GAS
- CLS55 AMG | 2006 | Base | 8 Cyl 5.5 L GAS
- CLS550 | 2007-2018 | 4Matic, Base | 8 Cyl 4.7 L GAS, 8 Cyl 5.5 L GAS
- CLS63 AMG | 2007-2014 | 4Matic, Base | 8 Cyl 5.5 L GAS, 8 Cyl 6.3 L GAS
View More
View related parts
Mercedes-Benz Hub
Part Number: 221-357-02-08
$163.20 MSRP: $228.00
You Save: $64.80 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rear-Axle Wheel Flange; Hub
- Position: Rear
- Replaces: 221-357-01-08
Fits the following Mercedes-Benz Models:
- CL65 AMG | 2008-2014 | Base | 12 Cyl 6.0 L GAS
- S65 AMG | 2006-2013 | Base | 12 Cyl 6.0 L GAS
View related parts
Mercedes-Benz Hub & Bearing
Part Number: 204-330-06-25
$146.40 MSRP: $204.00
You Save: $57.60 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Front Wheel Hub; Hub, Hub & Bearing, Hub Assembly
- Position: Front
- Replaces: 204-330-04-25
Fits the following Mercedes-Benz Models:
- C250 | 2012-2015 | Base, Luxury, Sport | 4 Cyl 1.8 L GAS
- C300 | 2008-2014 | 4Matic, 4Matic Luxury, 4Matic Sport, Luxury, Sport | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS
- C350 | 2008-2015 | 4Matic, Base, Sport | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS
- E350 | 2010-2014 | 4Matic, Base, Bluetec | 6 Cyl 3.0 L DIESEL, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS
- E400 | 2015-2017 | 4Matic, Base | 6 Cyl 3.0 L GAS
- E550 | 2010-2017 | 4Matic, Base | 8 Cyl 4.7 L GAS, 8 Cyl 5.5 L GAS
- E63 AMG | 2010-2011 | Base | 8 Cyl 6.3 L GAS
- SLC300 | 2017-2020 | Base, Final Edition | 4 Cyl 2.0 L GAS
- SLK250 | 2012-2015 | Base | 4 Cyl 1.8 L GAS
- SLK300 | 2016 | Base | 4 Cyl 2.0 L GAS
View More
View related parts
Mercedes-Benz Wheel Hub
Part Number: 222-357-03-00
$162.00 MSRP: $226.00
You Save: $64.00 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rear-Axle Wheel Flange; Rear Hub
Fits the following Mercedes-Benz Models:
- S65 AMG | 2015-2020 | Base | 12 Cyl 6.0 L GAS
View related parts
Mercedes-Benz Wheel Hub
Part Number: 222-357-01-08
$156.00 MSRP: $218.00
You Save: $62.00 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rear-Axle Wheel Flange; Rear Hub
- Position: Rear
Fits the following Mercedes-Benz Models:
- S63 AMG | 2014-2021 | 4Matic, Base | 8 Cyl 4.0 L GAS, 8 Cyl 5.5 L GAS
View related parts
Mercedes-Benz Front Hub
Part Number: 220-330-07-25
$190.80 MSRP: $266.00
You Save: $75.20 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Front Wheel Hub; Front Hub, Hub, Hub Assembly
- Position: Front
Fits the following Mercedes-Benz Models:
- CL500 | 2000-2006 | Base | 8 Cyl 5.0 L GAS
- CL55 AMG | 2001-2006 | Base | 8 Cyl 5.5 L GAS
- CL600 | 2001-2006 | Base | 12 Cyl 5.5 L GAS, 12 Cyl 5.8 L GAS
- CL65 AMG | 2005-2006 | Base | 12 Cyl 6.0 L GAS
- S350 | 2006 | Base | 6 Cyl 3.7 L GAS
- S430 | 2000-2006 | 4Matic, Base | 8 Cyl 4.3 L GAS
- S500 | 2000-2006 | 4Matic, Base, Guard | 8 Cyl 5.0 L GAS
- S55 AMG | 2001-2006 | Base, Kompressor | 8 Cyl 5.5 L GAS
- S600 | 2001-2006 | Base | 12 Cyl 5.5 L GAS, 12 Cyl 5.8 L GAS
- S65 AMG | 2006 | Base | 12 Cyl 6.0 L GAS
View More
View related parts
Mercedes-Benz Front Hub & Bearing
Part Number: 223-334-03-00
$154.80 MSRP: $216.00
You Save: $61.20 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Wheel Bearing, Driven; Front Hub & Bearing, Hub Assembly
Fits the following Mercedes-Benz Models:
- C300 | 2022-2024 | 4Matic | 4 Cyl 2.0 L GAS, 4 Cyl 2.0 L MILD HYBRID EV-GAS (MHEV)
- C43 AMG | 2023-2024 | 4Matic | 4 Cyl 2.0 L MILD HYBRID EV-GAS (MHEV), 6 Cyl 3.0 L GAS
- GLC300 | 2023 | 4Matic, Base | 4 Cyl 2.0 L GAS, 4 Cyl 2.0 L MILD HYBRID EV-GAS (MHEV)
- S500 | 2021-2023 | 4Matic | 6 Cyl 3.0 L MILD HYBRID EV-GAS (MHEV)
- S580 | 2021-2023 | 4Matic | 8 Cyl 4.0 L MILD HYBRID EV-GAS (MHEV)
- S580e | 2023 | 4Matic | 6 Cyl 3.0 L PLUG-IN HYBRID EV-GAS (PHEV)
View More
View related parts
Mercedes-Benz Front Hub
Part Number: 202-330-00-25
$147.60 MSRP: $206.00
You Save: $58.40 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Wheel-Hub; Front Hub, Hub
- Replaces: 202-334-05-01
Fits the following Mercedes-Benz Models:
- C220 | 1994-1996 | Base | 4 Cyl 2.2 L GAS
- C280 | 1994-1996 | Base | 6 Cyl 2.8 L GAS
View related parts
Mercedes-Benz Rear Hub & Bearing
Part Number: 206-356-01-00-64
$184.80 MSRP: $258.00
You Save: $73.20 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Wheel Bearing, Driven; Hub & Bearing, Hub Assembly, Rear Hub Bearings
- Replaces: 206-356-01-00
Fits the following Mercedes-Benz Models:
- EQS AMG | 2022-2024 | 4Matic | BATTERY EV (EV/BEV)
- SL55 AMG | 2022-2023 | 4Matic | 8 Cyl 4.0 L GAS
- SL63 AMG | 2022-2023 | 4Matic | 8 Cyl 4.0 L GAS
View More
View related parts
Mercedes-Benz Front Hub
Part Number: 203-337-00-45
$164.40 MSRP: $230.00
You Save: $65.60 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Flange; Hub
- Position: Front
Fits the following Mercedes-Benz Models:
- C230 | 2003-2007 | Kompressor, Sport | 4 Cyl 1.8 L GAS, 6 Cyl 2.5 L FLEX, 6 Cyl 2.5 L GAS
- C240 | 2003-2005 | 4Matic, Base | 6 Cyl 2.6 L GAS
- C280 | 2006-2007 | 4Matic, Luxury | 6 Cyl 3.0 L GAS
- C32 AMG | 2003-2004 | Base | 6 Cyl 3.2 L GAS
- C320 | 2003-2005 | 4Matic, Base | 6 Cyl 3.2 L FLEX, 6 Cyl 3.2 L GAS
- C350 | 2006-2007 | 4Matic, Luxury, Sport | 6 Cyl 3.5 L GAS
- C55 AMG | 2005-2006 | Base | 8 Cyl 5.5 L GAS
View More
View related parts
Mercedes-Benz Rear Hub & Bearing
Part Number: 223-356-01-00
$178.80 MSRP: $250.00
You Save: $71.20 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Wheel Bearing, Driven; Hub, Hub Assembly, Rear Hub Bearings
Fits the following Mercedes-Benz Models:
- C300 | 2022-2024 | 4Matic, Base | 4 Cyl 2.0 L GAS, 4 Cyl 2.0 L MILD HYBRID EV-GAS (MHEV)
- C43 AMG | 2023-2024 | 4Matic | 4 Cyl 2.0 L MILD HYBRID EV-GAS (MHEV), 6 Cyl 3.0 L GAS
- EQE 350 | 2023-2024 | 4Matic | BATTERY EV (EV/BEV)
- EQE 350 SUV | 2023 | 4Matic | BATTERY EV (EV/BEV)
- EQE 350+ SUV | 2023 | Base | BATTERY EV (EV/BEV)
- EQE 500 | 2023-2024 | 4Matic | BATTERY EV (EV/BEV)
- EQE 500 SUV | 2023 | 4Matic | BATTERY EV (EV/BEV)
- EQE AMG | 2023-2024 | 4Matic | BATTERY EV (EV/BEV)
- EQS 450 | 2023 | 4Matic | BATTERY EV (EV/BEV)
- EQS 450 SUV | 2023-2024 | 4Matic | BATTERY EV (EV/BEV)
View More

| Page 1 of 4 |Next >

1-20 of 62 Results

Mercedes-Benz Wheel Hub

Mercedes-Benz Wheel Hub ensures a confident driving experience by allowing the rim to lock to the axle while enabling the wheel to rotate with minimal friction to provide a smooth and safe ride for each driver. Since 1926, Mercedes-Benz has combined German craftsmanship with constant innovation, from elegant sedans to cutting-edge electric cars, but without losing its reputation for luxury and reliability. The company boosted onboard tech with the voice-controlled MBUX system and now pushes boundaries again with MB.OS that unites driver assist, battery management, infotainment, and artificial intelligence. Energy recovery systems in its hybrids and EVs convert wasted motion into new power, demonstrating a brand that finds efficiency as important as style. Customers love the neat looks, smart cabins, and sturdy build which make every journey special, whether in a compact city runabout or a long-distance tourer. The second advantage of the Wheel Hub is its integrated design that houses bearings, studs, and often sensors in one sturdy unit that simplifies the assembly of the hub, sharpens the steering response, and ensures that braking signals are accurately communicated to electronic safety features. By controlling vehicle weight and torque loads, the component ensures no wobble, no noise, and no uneven tire wear which will lengthen suspension life and retain ride comfort across the entire lineup. Drivers love ease of replacement and consistent performance, which reinforces the overall dependability of the brand.

Genuine parts are built to last. These components go through tough factory testing, so you can trust they will hold up over time. At MBPartsGiant.com, finding Mercedes-Benz Wheel Hub is quick and simple. We keep a massive inventory in stock with low prices that are hard to beat. Just order online to get a real manufacturer's warranty with every single part. Returns won't be a headache either, thanks to our no-hassle policy. If you are in a rush, we provide expedited shipping to get your vehicle back on the road. Don't wait. Finish your repairs today and keep your Mercedes-Benz running like new. Explore the catalog now.

Mercedes-Benz Wheel Hub Parts and Q&A

Front Hub
124-330-22-25
Q: How to remove, overhaul, and refit the Wheel Hub assembly on Mercedes-Benz 190E?
A:
The hub assembly should only be removed if the bearings need to be renewed, as the hub bearing inner race is a press-fit on the steering knuckle, and removal may damage the bearings. A press is necessary for dismantling and rebuilding the assembly; if unavailable, a large bench vice and spacers like large sockets can be used as substitutes. The inner races of the bearings are an interference fit on the hub, and if the inner race remains on the hub during pressing, a knife-edged bearing puller will be needed for removal. Begin by removing the front brake disc and, for models with ABS, the front wheel sensor. Tap out the grease cap from the hub's center, replacing it if damaged. Remove the radio interference spring if present, then slacken the hub nut clamp bolt and hub nut, removing the thrust washer if applicable. Withdraw the front hub assembly from the steering knuckle, using a puller if it is a tight fit. If the inner bearing race stays on the steering knuckle, use a knife-edge type puller to remove it, then slide off the hub oil seal and inspect the steering knuckle axle shaft for damage, renewing if necessary. For overhaul, remove the inner race from the outer bearing, carefully lever out the oil seal from the rear of the hub assembly, and tap the outer bearing inner race out using a hammer and punch. Remove the inner bearing outer race similarly, clean the hub thoroughly, and check for wear or damage, renewing as needed. During reassembly, apply a light coating of grease to the bearing outer race and hub contact surfaces, ensuring the inner bearing outer race is pressed fully into position squarely. Fit the outer bearing inner race and the inner race to the inner bearing, then install the oil seal with its sealing lip facing inwards. Pack the hub assembly with grease and fit the inner race to the outer bearing. For refitting, grease the hub rear oil seal lip and locate the hub assembly onto the steering knuckle shaft, then fit the thrust washer and screw on the hub nut. Rotate the hub assembly while using the hub nut to press it onto the steering knuckle axle, adjusting the hub bearing endfloat and tightening the hub nut clamp bolt to the specified torque. After setting the endfloat, remove the dial gauge, fit the radio interference spring if applicable, tap the grease cap into position, and refit the brake disc and ABS front wheel sensor if necessary.