How to replace the front and rear crankshaft seals in the Diesel engine on 1987 Mercedes-Benz 190E?

In order to change the crankshaft front oil seal, the pulley must be removed and the depth of the seal measured. Removal can be made with a hooked tool or screw, clean the housing, and replace the new seal. To fit the rear seal, take off the flywheel, examine the crankshaft and repeat the same steps until you have installed it well sealed.

Genuine 1987 Mercedes-Benz 190E Crankshaft Seal

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Crankshaft Seals found

View related parts
1987 Mercedes-Benz 190E Rear Main Seal
Part Number: 017-997-74-47
$18.30 MSRP: $25.00
You Save: $6.70 (27%)
ADD TO CART
Product Specifications
- Other Name: Seal Ring, Rear Crankshaft
- Position: Rear
- Replaces: 010-997-10-47
- Item Weight: 0.50 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 017-997-74-47
- Warranty: This genuine part is guaranteed by Mercedes-Benz's factory warranty.
More Info
Fits the following 1987 Mercedes-Benz 190E Submodels:
- 2.3 | 4 Cyl 2.3 L GAS
View related parts
1987 Mercedes-Benz 190E Rear Main Seal
Part Number: 011-997-06-47
$43.20 MSRP: $60.00
You Save: $16.80 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal Ring, Vlrub
- Position: Rear
- Replaces: 010-997-90-47
- Item Weight: 0.50 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 011-997-06-47
- Warranty: This genuine part is guaranteed by Mercedes-Benz's factory warranty.
More Info
Fits the following 1987 Mercedes-Benz 190E Submodels:
- 2.6 | 6 Cyl 2.6 L GAS

1987 Mercedes-Benz 190E Crankshaft Seal Parts Q&A

Q: How to replace the front and rear crankshaft seals in the Diesel engine on 1987 Mercedes-Benz 190E?
A: In order to change the crankshaft front oil seal, the pulley must be removed and the depth of the seal measured. Removal can be made with a hooked tool or screw, clean the housing, and replace the new seal. To fit the rear seal, take off the flywheel, examine the crankshaft and repeat the same steps until you have installed it well sealed.