How to remove and refit the Sway Bar Link on 1993 Mercedes-Benz 190E?

The procedure to replace the sway bar link should include chocking of the wheels in front, putting a parking brake on, and lifting the rear to replace the sway bar link. Turn off the roadwheel and protective cover. Unscrew the sway bar link to the anti-roll bar and the lower arm, examining it carefully. Re-fit with new nuts, tighten to required torque, and re-fit roadwheel.

Genuine 1993 Mercedes-Benz 190E Sway Bar Link

Stabilizer Sway Bar Link

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Sway Bar Link found

View related parts
1993 Mercedes-Benz 190E Torsion Bar Link
Part Number: 124-320-02-89
$10.98 MSRP: $15.00
You Save: $4.02 (27%)
ADD TO CART
Product Specifications
- Other Name: Rod, Torsion Bar; Link, Link Kit, Rod, Stabilizer Link
- Replaces: 124-320-02-89-64
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 124-320-02-89
- Warranty: This genuine part is guaranteed by Mercedes-Benz's factory warranty.
Fits the following 1993 Mercedes-Benz 190E Submodels:
- 2.3, 2.3-16, 2.6 | 4 Cyl 2.3 L GAS, 6 Cyl 2.6 L GAS

1993 Mercedes-Benz 190E Sway Bar Link Parts Q&A

Q: How to remove and refit the Sway Bar Link on 1993 Mercedes-Benz 190E?
A: The procedure to replace the sway bar link should include chocking of the wheels in front, putting a parking brake on, and lifting the rear to replace the sway bar link. Turn off the roadwheel and protective cover. Unscrew the sway bar link to the anti-roll bar and the lower arm, examining it carefully. Re-fit with new nuts, tighten to required torque, and re-fit roadwheel.