Is the rear crankshaft seal and housing serviced as one complete assembly on 2001 Mercedes-Benz C320?

The crankshaft seal and housing are serviced as a complete assembly, similar to the four-cylinder engine. For 2006 and later models with 272 engines, apply a 2 mm bead of RTV sealant at the cover-sealing area and around the bolt holes, using the specified torque value.

Genuine 2001 Mercedes-Benz C320 Crankshaft Seal

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Crankshaft Seals found

View related parts
2001 Mercedes-Benz C320 Timing Cover Front Seal
Part Number: 023-997-84-47-64
$20.13 MSRP: $27.50
You Save: $7.37 (27%)
ADD TO CART
Product Specifications
- Other Name: Sealing Ring
- Replaces: 021-997-76-47, 021-997-18-47, 023-997-84-47, 018-997-19-47
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 023-997-84-47-64
- Warranty: This genuine part is guaranteed by Mercedes-Benz's factory warranty.
Fits the following 2001 Mercedes-Benz C320 Submodels:
- 4Matic, Base | 6 Cyl 3.2 L FLEX, 6 Cyl 3.2 L GAS
View related parts
2001 Mercedes-Benz C320 Rear Main Seal
Part Number: 112-997-02-46-65
$36.00 MSRP: $50.00
You Save: $14.00 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sealing Ring; Rear Main Seal
- Replaces: 112-997-00-46, 112-997-02-46, 112-997-02-46-64
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 112-997-02-46-65
- Warranty: This genuine part is guaranteed by Mercedes-Benz's factory warranty.
Fits the following 2001 Mercedes-Benz C320 Submodels:
- 4Matic, Base | 6 Cyl 3.2 L FLEX, 6 Cyl 3.2 L GAS

2001 Mercedes-Benz C320 Crankshaft Seal Parts Q&A

Q: Is the rear crankshaft seal and housing serviced as one complete assembly on 2001 Mercedes-Benz C320?
A: The crankshaft seal and housing are serviced as a complete assembly, similar to the four-cylinder engine. For 2006 and later models with 272 engines, apply a 2 mm bead of RTV sealant at the cover-sealing area and around the bolt holes, using the specified torque value.