How to remove and install a crankshaft seal on 2002 Mercedes-Benz C240?

Take the crankshaft pulley off, and press the old seal off the crankshaft with great care to avoid scratches on it. Record the depth and direction of seal. Apply a coat of engine oil along the inside lip of the new seal, and impale it with a seal driver or socket. Installation is the reverse of the steps.

Genuine 2002 Mercedes-Benz C240 Crankshaft Seal

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Crankshaft Seals found

View related parts
2002 Mercedes-Benz C240 Timing Cover Front Seal
Part Number: 023-997-84-47-64
$20.13 MSRP: $27.50
You Save: $7.37 (27%)
ADD TO CART
Product Specifications
- Other Name: Sealing Ring
- Replaces: 021-997-76-47, 021-997-18-47, 023-997-84-47, 018-997-19-47
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 023-997-84-47-64
- Warranty: This genuine part is guaranteed by Mercedes-Benz's factory warranty.
Fits the following 2002 Mercedes-Benz C240 Submodels:
- 4Matic, Base | 6 Cyl 2.6 L GAS
View related parts
2002 Mercedes-Benz C240 Rear Main Seal
Part Number: 112-997-02-46-65
$36.00 MSRP: $50.00
You Save: $14.00 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sealing Ring; Rear Main Seal
- Replaces: 112-997-00-46, 112-997-02-46, 112-997-02-46-64
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 112-997-02-46-65
- Warranty: This genuine part is guaranteed by Mercedes-Benz's factory warranty.
Fits the following 2002 Mercedes-Benz C240 Submodels:
- 4Matic, Base | 6 Cyl 2.6 L GAS

2002 Mercedes-Benz C240 Crankshaft Seal Parts Q&A

Q: How to remove and install a crankshaft seal on 2002 Mercedes-Benz C240?
A: Take the crankshaft pulley off, and press the old seal off the crankshaft with great care to avoid scratches on it. Record the depth and direction of seal. Apply a coat of engine oil along the inside lip of the new seal, and impale it with a seal driver or socket. Installation is the reverse of the steps.