How is the rear crankshaft seal replaced on 2004 Mercedes-Benz C320?

To replace the crankshaft seal, the transmission and driveplate have to be removed. Special tools are used to service the seal and the housing together. Installation: Once the housing has been installed, it should be made to run even with the surface of the oil pan to eliminate leakages and then assemble in reverse order.

Genuine 2004 Mercedes-Benz C320 Crankshaft Seal

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Crankshaft Seals found

View related parts
2004 Mercedes-Benz C320 Timing Cover Front Seal
Part Number: 023-997-84-47-64
$20.13 MSRP: $27.50
You Save: $7.37 (27%)
ADD TO CART
Product Specifications
- Other Name: Sealing Ring
- Replaces: 021-997-76-47, 021-997-18-47, 023-997-84-47, 018-997-19-47
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 023-997-84-47-64
- Warranty: This genuine part is guaranteed by Mercedes-Benz's factory warranty.
Fits the following 2004 Mercedes-Benz C320 Submodels:
- 4Matic, Base | 6 Cyl 3.2 L FLEX, 6 Cyl 3.2 L GAS
View related parts
2004 Mercedes-Benz C320 Rear Main Seal
Part Number: 112-997-02-46-65
$36.00 MSRP: $50.00
You Save: $14.00 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sealing Ring; Rear Main Seal
- Replaces: 112-997-00-46, 112-997-02-46, 112-997-02-46-64
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 112-997-02-46-65
- Warranty: This genuine part is guaranteed by Mercedes-Benz's factory warranty.
Fits the following 2004 Mercedes-Benz C320 Submodels:
- 4Matic, Base | 6 Cyl 3.2 L FLEX, 6 Cyl 3.2 L GAS

2004 Mercedes-Benz C320 Crankshaft Seal Parts Q&A

Q: How is the rear crankshaft seal replaced on 2004 Mercedes-Benz C320?
A: To replace the crankshaft seal, the transmission and driveplate have to be removed. Special tools are used to service the seal and the housing together. Installation: Once the housing has been installed, it should be made to run even with the surface of the oil pan to eliminate leakages and then assemble in reverse order.