How to remove and install the valve cover in the Four-cylinder engines on Mercedes-Benz C230?

People who want to remove the valve cover should start by disconnecting the battery negative terminal cable. Then take the engine cover and attach it to the engine; this has bolts on it which are glued to the engine studs; hence it can be taken off by pulling it. Then remove the ignition coils, spark plugs, then remove the PCV hose out of the grommet area on the valve cover. Unscrew the electrical connector in the camshaft position sensor, loosen the mounting bolts on the valve cover, strip them one at a time, then pull them out. When the valve cover from a cylinder becomes stuck to the cylinder head, loosen it by block of wood and hammer. To install, be sure that the surfaces at which these two sets of cylinder heads and valve covers mate are entirely clean. Test the rubber gaskets; they can be reused, in case they was in good condition and no oil was leaking out. Clean mounting bolt threads (or die where applicable) with a die and clean threaded holes in heads with a tap. Install the valve cover and attach the bolts in a series of steps, in the correct order and to the desired torque. Lastly close the installation by doing so in reverse, starting the engine and checking the oil leakages closely.

Genuine Mercedes-Benz C230 Valve Cover

Cylinder Head Cover

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

9 Valve Covers found

View related parts
Mercedes-Benz C230 Front Cover
Part Number: 272-015-01-01
$66.00 MSRP: $92.00
You Save: $26.00 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover, Front Cover, Valve Cover
- Replaced by: 272-015-06-01
- Warranty: This genuine part is guaranteed by Mercedes-Benz's factory warranty.
Fits the following Vehicles:
- 2006-2007 Mercedes-Benz C230 | Sport | 6 Cyl 2.5 L FLEX, 6 Cyl 2.5 L GAS
View related parts
Mercedes-Benz C230 Front Cover
Part Number: 272-015-02-01
$66.00 MSRP: $92.00
You Save: $26.00 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover, Front Cover, Valve Cover
- Replaced by: 272-015-05-01
- Warranty: This genuine part is guaranteed by Mercedes-Benz's factory warranty.
Fits the following Vehicles:
- 2006-2007 Mercedes-Benz C230 | Sport | 6 Cyl 2.5 L FLEX, 6 Cyl 2.5 L GAS
View related parts
Mercedes-Benz C230 Front Cover
Part Number: 111-016-11-06
$142.80 MSRP: $199.00
You Save: $56.20 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover; Valve Cover
- Position: Front
- Warranty: This genuine part is guaranteed by Mercedes-Benz's factory warranty.
Fits the following Vehicles:
- 2002 Mercedes-Benz C230 | Kompressor | 4 Cyl 2.3 L GAS
View related parts
Mercedes-Benz C230 Front Cover
Part Number: 111-016-09-06
$97.20 MSRP: $135.00
You Save: $37.80 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover; Front Cover
- Replaces: 111-016-04-06
- Warranty: This genuine part is guaranteed by Mercedes-Benz's factory warranty.
Fits the following Vehicles:
- 1997-2000 Mercedes-Benz C230 | Base, Kompressor | 4 Cyl 2.3 L GAS
View related parts
Mercedes-Benz C230 Valve Cover
Part Number: 271-010-06-30
$171.60 MSRP: $240.00
You Save: $68.40 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Valve Cover
- Replaced by: 271-010-10-30
- Warranty: This genuine part is guaranteed by Mercedes-Benz's factory warranty.
Fits the following Vehicles:
- 2003-2005 Mercedes-Benz C230 | Kompressor | 4 Cyl 1.8 L GAS
View related parts
Mercedes-Benz C230 Valve Cover
Part Number: 111-010-19-30
$386.40 MSRP: $540.00
You Save: $153.60 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder Head Cover
- Warranty: This genuine part is guaranteed by Mercedes-Benz's factory warranty.
Fits the following Vehicles:
- 2002 Mercedes-Benz C230 | Kompressor | 4 Cyl 2.3 L GAS
View related parts
Mercedes-Benz C230 Valve Cover
Part Number: 111-010-03-30
$332.40 MSRP: $462.00
You Save: $129.60 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder Head Cover
- Warranty: This genuine part is guaranteed by Mercedes-Benz's factory warranty.
Fits the following Vehicles:
- 1997-1998 Mercedes-Benz C230 | Base | 4 Cyl 2.3 L GAS
View related parts
Mercedes-Benz C230 Valve Cover
Part Number: 271-010-10-30
$171.60 MSRP: $240.00
You Save: $68.40 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder Head Cover; Valve Cover
- Warranty: This genuine part is guaranteed by Mercedes-Benz's factory warranty.
Fits the following Vehicles:
- 2003-2005 Mercedes-Benz C230 | Kompressor | 4 Cyl 1.8 L GAS
View related parts
Mercedes-Benz C230 Valve Cover
Part Number: 111-010-13-30
Product Specifications
- Other Name: Cylinder Head Cover
- Warranty: This genuine part is guaranteed by Mercedes-Benz's factory warranty.
Fits the following Vehicles:
- 1999-2000 Mercedes-Benz C230 | Kompressor | 4 Cyl 2.3 L GAS

Mercedes-Benz C230 Valve Cover

Every OEM part goes through strict quality checks. The checks keep you safe and make Valve Cover tough. They keep performance the same as your original parts. If your Mercedes-Benz C230 needs OEM parts, visit our catalog. You will find extensive genuine Mercedes-Benz C230 parts. We offer a wide selection at competitive prices, and with clear fit details and simple guidance, choosing what you need is effortless. Each of our parts has a manufacturer's warranty. You will like our simple return policy. We pack and ship fast, and you get your order quickly. Shopping here feels easy and enjoyable.

Mercedes-Benz C230 Valve Cover Parts and Q&A

Valve Cover
111-010-19-30
Q: How to remove and install the valve cover in the Four-cylinder engines on Mercedes-Benz C230?
A:
People who want to remove the valve cover should start by disconnecting the battery negative terminal cable. Then take the engine cover and attach it to the engine; this has bolts on it which are glued to the engine studs; hence it can be taken off by pulling it. Then remove the ignition coils, spark plugs, then remove the PCV hose out of the grommet area on the valve cover. Unscrew the electrical connector in the camshaft position sensor, loosen the mounting bolts on the valve cover, strip them one at a time, then pull them out. When the valve cover from a cylinder becomes stuck to the Cylinder Head, loosen it by block of wood and hammer. To install, be sure that the surfaces at which these two sets of cylinder heads and valve covers mate are entirely clean. Test the rubber gaskets; they can be reused, in case they was in good condition and no oil was leaking out. Clean mounting bolt threads (or die where applicable) with a die and clean threaded holes in heads with a tap. Install the valve cover and attach the bolts in a series of steps, in the correct order and to the desired torque. Lastly close the installation by doing so in reverse, starting the engine and checking the oil leakages closely.

Related Mercedes-Benz C230 Parts

Browse by Year

2007 Valve Cover 2006 Valve Cover 2005 Valve Cover 2004 Valve Cover 2003 Valve Cover 2002 Valve Cover 2000 Valve Cover 1999 Valve Cover 1998 Valve Cover 1997 Valve Cover