How to secure front engine mounts on Mercedes-Benz C280?

This procedure is essentially the same as for the four-cylinder engine, utilizing the outlined steps while applying the specified torque values. The front mounts feature an upper mounting bolt that secures them to the engine bracket and a lower bolt that fastens them to the subframe.

How to check and replace engine mounts on Mercedes-Benz C280?

There are three power train mounts: left and right engine mounts attached to the engine block and subframe, and a rear mount attached to the transmission and subframe. During the check, the engine must be raised slightly to remove the weight from the mounts. To do this, raise the vehicle and support it securely on jackstands, then remove the front wheels and tires. Position two jacks, one under the crankshaft pulley and the other under the transmission bellhousing, using a block of wood between the jack head and the crankshaft pulley or bellhousing, and carefully raise the engine/transmission just enough to take the weight off the mounts. The safest method is to use an engine support cradle that raises the engine from above, which can be rented at most tool rental shops. Check the mounts for any cracks, hardened rubber, or separation from the metal plates, as the rubber may sometimes split down the center. Also, check for relative movement between the mount brackets and the engine or subframe by using a large screwdriver or prybar to attempt to move the mounts; if movement is noted, lower the engine and tighten the mount fasteners. To replace the mounts, disconnect the cable from the negative terminal of the battery, then raise the vehicle and support it securely on jackstands. Remove the engine splash shield, then take out the bolts holding the engine mount to the subframe. Raise the engine until the engine mount bracket clears the subframe, then remove the bracket-to-mount bolt from above. Remove one engine mount and replace it with a new one, then replace the other front mount. Install the bolts, lower the engine, and tighten the bolts to the specified torque.

Genuine Mercedes-Benz C280 Engine Mount

Engine Motor Mount

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

26 Engine Mounts found

View related parts
Mercedes-Benz C280 Lift Bracket
Part Number: 112-223-03-41
$7.20 MSRP: $10.00
You Save: $2.80 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Suspension Eye
- Replaces: 112-223-01-41
- Warranty: This genuine part is guaranteed by Mercedes-Benz's factory warranty.
Fits the following Vehicles:
- 1998-2000 Mercedes-Benz C280 | Base | 6 Cyl 2.8 L GAS
View related parts
Mercedes-Benz C280 Lift Bracket
Part Number: 272-223-00-41
$7.20 MSRP: $10.00
You Save: $2.80 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Suspension Eye; Lift Bracket
- Warranty: This genuine part is guaranteed by Mercedes-Benz's factory warranty.
Fits the following Vehicles:
- 2006-2007 Mercedes-Benz C280 | 4Matic, Luxury | 6 Cyl 3.0 L GAS
View related parts
Mercedes-Benz C280 Lift Bracket
Part Number: 112-223-04-41
$4.51 MSRP: $6.25
You Save: $1.74 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Suspension Eye
- Replaces: 112-223-02-41
- Warranty: This genuine part is guaranteed by Mercedes-Benz's factory warranty.
Fits the following Vehicles:
- 1998-2000 Mercedes-Benz C280 | Base | 6 Cyl 2.8 L GAS
View related parts
Mercedes-Benz C280 Support Bracket Bracket
Part Number: 104-223-14-41
$5.66 MSRP: $7.75
You Save: $2.09 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Suspension Eye; Support Bracket
- Warranty: This genuine part is guaranteed by Mercedes-Benz's factory warranty.
Fits the following Vehicles:
- 1994-1997 Mercedes-Benz C280 | Base | 6 Cyl 2.8 L GAS
View related parts
Mercedes-Benz C280 Transmission Mount Rear Bracket
Part Number: 140-242-13-40
$23.18 MSRP: $32.00
You Save: $8.82 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket
- Position: Rear
- Warranty: This genuine part is guaranteed by Mercedes-Benz's factory warranty.
Fits the following Vehicles:
- 1998-2000 Mercedes-Benz C280 | Base | 6 Cyl 2.8 L GAS
View related parts
Mercedes-Benz C280 Rear Mount Support
Part Number: 202-242-08-01
$41.40 MSRP: $58.00
You Save: $16.60 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Engine Support
- Warranty: This genuine part is guaranteed by Mercedes-Benz's factory warranty.
Fits the following Vehicles:
- 1997 Mercedes-Benz C280 | Base | 6 Cyl 2.8 L GAS
View related parts
Mercedes-Benz C280 Support Bracket Bracket
Part Number: 104-220-12-41
$120.00 MSRP: $167.00
You Save: $47.00 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lifting Device; Support Bracket
- Replaced by: 104-220-12-41-64
- Warranty: This genuine part is guaranteed by Mercedes-Benz's factory warranty.
Fits the following Vehicles:
- 1994-1997 Mercedes-Benz C280 | Base | 6 Cyl 2.8 L GAS
View related parts
Mercedes-Benz C280 Transmission Mount Bracket
Part Number: 211-242-03-40
$43.80 MSRP: $61.00
You Save: $17.20 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket
- Position: Rear
- Warranty: This genuine part is guaranteed by Mercedes-Benz's factory warranty.
Fits the following Vehicles:
- 2006-2007 Mercedes-Benz C280 | 4Matic, Luxury | 6 Cyl 3.0 L GAS
View related parts
Mercedes-Benz C280 Transmission Mount
Part Number: 203-240-02-18-64
$100.80 MSRP: $140.00
You Save: $39.20 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rubber Bushing; Bracket, Rear Mount, Transmission Mount
- Replaces: 203-240-02-18
- Warranty: This genuine part is guaranteed by Mercedes-Benz's factory warranty.
Fits the following Vehicles:
- 2006-2007 Mercedes-Benz C280 | 4Matic, Luxury | 6 Cyl 3.0 L GAS
View related parts
Mercedes-Benz C280 Rear Mount
Part Number: 202-240-04-18
$70.80 MSRP: $99.00
You Save: $28.20 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rubber Mounting
- Position: Rear
- Replaced by: 202-240-04-18-64
- Replaces: 202-240-14-18, 202-240-05-18, 202-240-04-18-64
- Warranty: This genuine part is guaranteed by Mercedes-Benz's factory warranty.
Fits the following Vehicles:
- 1994-1996 Mercedes-Benz C280 | Base | 6 Cyl 2.8 L GAS
View related parts
Mercedes-Benz C280 Front Mount
Part Number: 203-240-12-17
$115.20 MSRP: $160.00
You Save: $44.80 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rubber Mounting; Front Mount
- Replaces: 203-240-05-17-98, 203-240-05-17, 202-240-27-17
- Warranty: This genuine part is guaranteed by Mercedes-Benz's factory warranty.
Fits the following Vehicles:
- 1998-2000 Mercedes-Benz C280 | Base | 6 Cyl 2.8 L GAS
View related parts
Mercedes-Benz C280 Rear Insulator
Part Number: 212-240-04-18
$85.20 MSRP: $119.00
You Save: $33.80 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Engine Mounting
- Replaces: 220-240-02-18, 220-240-18-18, 220-240-05-18
- Warranty: This genuine part is guaranteed by Mercedes-Benz's factory warranty.
Fits the following Vehicles:
- 2006-2007, 1998-2000 Mercedes-Benz C280 | 4Matic, Base, Luxury | 6 Cyl 2.8 L GAS, 6 Cyl 3.0 L GAS
View related parts
Mercedes-Benz C280 Front Mount Bracket
Part Number: 272-223-09-04
$264.00 MSRP: $368.00
You Save: $104.00 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Engine Support; Front Bracket, Front Mount Bracket, Mount
- Warranty: This genuine part is guaranteed by Mercedes-Benz's factory warranty.
Fits the following Vehicles:
- 2006-2007 Mercedes-Benz C280 | 4Matic, Luxury | 6 Cyl 3.0 L GAS
View related parts
Mercedes-Benz C280 Rear Mount Support
Part Number: 203-240-05-02
$110.40 MSRP: $154.00
You Save: $43.60 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Engine Support
- Replaces: 203-240-02-02
- Warranty: This genuine part is guaranteed by Mercedes-Benz's factory warranty.
Fits the following Vehicles:
- 2006-2007 Mercedes-Benz C280 | 4Matic, Luxury | 6 Cyl 3.0 L GAS
View related parts
Mercedes-Benz C280 Support Bracket
Part Number: 272-223-08-04
$732.00 MSRP: $1020.00
You Save: $288.00 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Engine Support; Front Bracket, Mount, Mount Bracket
- Warranty: This genuine part is guaranteed by Mercedes-Benz's factory warranty.
Fits the following Vehicles:
- 2006-2007 Mercedes-Benz C280 | 4Matic, Luxury | 6 Cyl 3.0 L GAS
View related parts
Mercedes-Benz C280 Front Mount
Part Number: 210-240-20-17
$129.60 MSRP: $180.00
You Save: $50.40 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Engine Mounting; Front Mount
- Replaces: 202-240-08-17, 210-240-04-17
- Warranty: This genuine part is guaranteed by Mercedes-Benz's factory warranty.
Fits the following Vehicles:
- 1994-1997 Mercedes-Benz C280 | Base | 6 Cyl 2.8 L GAS
View related parts
Mercedes-Benz C280 Support Bracket
Part Number: 112-223-37-04
$187.20 MSRP: $260.00
You Save: $72.80 (28%)
ADD TO CART
Product Specifications
- Other Name: Engine Support; Bracket, Front Mount, Support Bracket
- Replaced by: 112-223-37-04-64
- Replaces: 112-223-15-04
- Warranty: This genuine part is guaranteed by Mercedes-Benz's factory warranty.
Fits the following Vehicles:
- 1998-2000 Mercedes-Benz C280 | Base | 6 Cyl 2.8 L GAS
View related parts
Mercedes-Benz C280 Rear Mount Support
Part Number: 202-242-09-01
Product Specifications
- Other Name: Engine Support; Rear Support
- Warranty: This genuine part is guaranteed by Mercedes-Benz's factory warranty.
Fits the following Vehicles:
- 1998-2000 Mercedes-Benz C280 | Base | 6 Cyl 2.8 L GAS
View related parts
Mercedes-Benz C280 Rear Mount Support
Part Number: 203-242-18-01
Product Specifications
- Other Name: Engine Support; Rear Support
- Warranty: This genuine part is guaranteed by Mercedes-Benz's factory warranty.
Fits the following Vehicles:
- 2006-2007 Mercedes-Benz C280 | 4Matic, Luxury | 6 Cyl 3.0 L GAS
View related parts
Mercedes-Benz C280 Rear Mount Support
Part Number: 202-242-03-01
Product Specifications
- Other Name: Engine Support
- Warranty: This genuine part is guaranteed by Mercedes-Benz's factory warranty.
Fits the following Vehicles:
- 1994-1996 Mercedes-Benz C280 | Base | 6 Cyl 2.8 L GAS

| Page 1 of 2 |Next >

1-20 of 26 Results

Mercedes-Benz C280 Engine Mount

Every part of the automobile matters, and their maintenance is crucial for the health of your vehicle. Moreover, a faulted Mercedes-Benz C280 Engine Mount can impact its functionality as well as lead to system-wide problems that may endanger safety. Thus, it is imperative that one repairs or replaces failing parts for better driving experiences. Why go for OEM Mercedes-Benz C280 Engine Mounts? Because they are the optimal solutions, fit your vehicle perfectly, and are easy to install. Therefore, these factors help maintain the dependability and performance of your vehicle. At MBPartsGiant.com, you may find all the required genuine parts for your Mercedes-Benz C280. They are delivered from authorized Mercedes-Benz dealers directly via an uncomplicated online catalog. We guarantee promptness, reliability, and cheap sales on the Mercedes-Benz C280 Engine Mount, and we always provide you with the right part at any time. Depend on our genuine Mercedes-Benz C280 Engine Mounts to keep your vehicle running smoothly.

Mercedes-Benz C280 Engine Mount Parts and Q&A

Front Mount
211-240-26-17-64
Q: How to secure front engine mounts on Mercedes-Benz C280?
A:
This procedure is essentially the same as for the four-cylinder engine, utilizing the outlined steps while applying the specified torque values. The front mounts feature an upper mounting bolt that secures them to the engine bracket and a lower bolt that fastens them to the subframe.
Transmission Mount
203-240-02-18-64
Q: How to check and replace engine mounts on Mercedes-Benz C280?
A:
There are three power train mounts: left and right engine mounts attached to the engine block and subframe, and a rear mount attached to the transmission and subframe. During the check, the engine must be raised slightly to remove the weight from the mounts. To do this, raise the vehicle and support it securely on jackstands, then remove the front wheels and tires. Position two jacks, one under the crankshaft pulley and the other under the transmission bellhousing, using a block of wood between the jack head and the crankshaft pulley or bellhousing, and carefully raise the engine/transmission just enough to take the weight off the mounts. The safest method is to use an engine support cradle that raises the engine from above, which can be rented at most tool rental shops. Check the mounts for any cracks, hardened rubber, or separation from the metal plates, as the rubber may sometimes split down the center. Also, check for relative movement between the mount brackets and the engine or subframe by using a large screwdriver or prybar to attempt to move the mounts; if movement is noted, lower the engine and tighten the mount fasteners. To replace the mounts, disconnect the cable from the negative terminal of the battery, then raise the vehicle and support it securely on jackstands. Remove the engine splash shield, then take out the bolts holding the engine mount to the subframe. Raise the engine until the engine mount bracket clears the subframe, then remove the bracket-to-mount bolt from above. Remove one engine mount and replace it with a new one, then replace the other front mount. Install the bolts, lower the engine, and tighten the bolts to the specified torque.