How to remove and refit of the Hood Release Cable on Mercedes-Benz 190E?

In order to disassemble the part, release the locking stud on the front panel adjacent to the support strut and remove the cover underneath the lock. In cars which have air conditioning, screw the two screws and position the fan and undo the four clips that are at the top, and push the radiator back to give easy access. The next step is to un-hook the hood release cable at the support bracket and lock lever. Interior Take out the cover of the facia on the left-hand side and screw, and release handle undone and cable disconnected. Pull the rubber grommet at the cable exit point on the bulkhead, and then tie a string to the hood release cable such that it will drag the string through as one draws it out. Draw the cable forward and see the drawstring and when it comes in sight undo it and pull the cable out of the car. When refitting, take the opposite steps of the removal one, and use the string to help the new cable through the bulkhead into the car.

Genuine Mercedes-Benz 190E Hood Release Cable

Hood Cable

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Hood Release Cables found

View related parts
Mercedes-Benz 190E Release Cable
Part Number: 201-880-02-59
$150.00 MSRP: $210.00
You Save: $60.00 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable, Hood Release; Release Cable
- Warranty: This genuine part is guaranteed by Mercedes-Benz's factory warranty.
Fits the following Vehicles:
- 1987-1993 Mercedes-Benz 190E | 2.6 | 6 Cyl 2.6 L GAS
View related parts
Mercedes-Benz 190E Release Cable
Part Number: 201-880-04-59
Product Specifications
- Other Name: Cable, Hood Release
- Warranty: This genuine part is guaranteed by Mercedes-Benz's factory warranty.
Fits the following Vehicles:
- 1991-1993, 1984-1988 Mercedes-Benz 190E | 2.3, 2.3-16, 2.6 | 4 Cyl 2.3 L GAS, 6 Cyl 2.6 L GAS

Mercedes-Benz 190E Hood Release Cable

Every part of the automobile matters, and their maintenance is crucial for the health of your vehicle. Moreover, a faulted Mercedes-Benz 190E Hood Release Cable can impact its functionality as well as lead to system-wide problems that may endanger safety. Thus, it is imperative that one repairs or replaces failing parts for better driving experiences. Why go for OEM Mercedes-Benz 190E Hood Release Cables? Because they are the optimal solutions, fit your vehicle perfectly, and are easy to install. Therefore, these factors help maintain the dependability and performance of your vehicle. At MBPartsGiant.com, you may find all the required genuine parts for your Mercedes-Benz 190E. They are delivered from authorized Mercedes-Benz dealers directly via an uncomplicated online catalog. We guarantee promptness, reliability, and cheap sales on the Mercedes-Benz 190E Hood Release Cable, and we always provide you with the right part at any time. Depend on our genuine Mercedes-Benz 190E Hood Release Cables to keep your vehicle running smoothly.

Mercedes-Benz 190E Hood Release Cable Parts and Q&A

Release Cable
201-880-02-59
Q: How to remove and refit of the Hood Release Cable on Mercedes-Benz 190E?
A:
In order to disassemble the part, release the locking stud on the front panel adjacent to the support strut and remove the cover underneath the lock. In cars which have air conditioning, screw the two screws and position the fan and undo the four clips that are at the top, and push the radiator back to give easy access. The next step is to un-hook the hood release cable at the support bracket and lock lever. Interior Take out the cover of the facia on the left-hand side and screw, and release handle undone and cable disconnected. Pull the rubber grommet at the cable exit point on the bulkhead, and then tie a string to the hood release cable such that it will drag the string through as one draws it out. Draw the cable forward and see the drawstring and when it comes in sight undo it and pull the cable out of the car. When refitting, take the opposite steps of the removal one, and use the string to help the new cable through the bulkhead into the car.