Genuine Mercedes-Benz 190E Hood Hinge

Mercedes-Benz 190E Hood Hinge Parts and Q&A

• Hinge
  201-880-05-28
  Q: How to remove and refit of the Hood Hinge on Mercedes-Benz 190E?

  A:

  In removal of the hood the plastic wheelarch covering under the wheel arch must first be removed to allow access to the Hood Hinge stocked nuts. Then unscrew the four hinge retaining nuts, and strip off the hinge. When refitting use the same sequence of actions as during the fit-up, and flatten out the hood afterward.
• Hinge
  201-880-06-28
  Q: How should you maintain and lubricate the Antenna, Door Hinge, Door Lock, Hood Hinge and Hood Latch in the petrol engine on Mercedes-Benz 190E?

  A:

  Lubricate the hinges of the bonnet, doors, and tailgate with a light general-purpose oil, and also lubricate all latches, locks, and lock strikers while checking the security and operation of all locks, adjusting them if necessary. Lightly lubricate the bonnet release mechanism and cable with a suitable grease. If an electric aerial is fitted, extend the aerial, remove all traces of dirt from its mast, lubricate the mast with a light general-purpose oil, and then retract the aerial. For models with a sunroof, slide the roof fully back, clean the sunroof guide rails, apply a smear of fresh multi-purpose grease to the rails, and close the sunroof.