Genuine Mercedes-Benz 300TD Car Bulbs

Mercedes-Benz 300TD Car Bulbs Parts and Q&A

• License Lamp Bulb
  000000-008146
  Q: How to replace the car bulbs in the front sidelamp, parking and turn signal light, interior lights, and rear lights on Mercedes-Benz 300TD?

  A:

  To replace the front sidelamp on UK models, unclip the headlamp rear cover, pull the sidelamp holder out, depress the bulb, and twist to remove it. For the parking and turn signal light, unscrew the white knurled knob in the engine compartment next to the headlamp assembly, remove the lamp housing, twist the bulb holder to remove it, and then press and turn the bulb for removal. To access the glove compartment light, pry the lamp from the top of the glove compartment and remove the bulb from the spring terminals. For the interior light, carefully pry the lamp assembly from the headlining and disengage the bulb from the spring terminals. To replace the hazard switch light, pry the switch from the center console, disconnect the plug, turn the bulb holder a quarter turn counterclockwise, and withdraw it, then depress and remove the bulb. For the automatic transmission gearshift selector light, remove the gearshift cover, pull the bulb holder out, and remove the bulb, using a screwdriver if necessary. To access the heater control lights, pull the heater control knobs off, remove the knob illumination bulbs, pull off the air flap control knob, unscrew the nuts, withdraw the control cover, and remove the bulbs from the holders. For the ashtray light, remove the ashtray, unscrew the two screws, and remove the cover to pull the bulb holder out and extract the bulb. To replace the Instrument Cluster light, remove the instrument cluster, turn the bulb holder a quarter turn to remove it, and pull the bulb from the holder. For the sun visor mirror light, pry alternately at both sides of the mirror with a small screwdriver to access the bulb. Open the trunk to remove the bulb from the spring terminals for the trunk light. For taillights on sedan models, unscrew the white knurled knobs in the trunk and remove the bulb holder assembly; on station wagon models, remove the retaining nuts, push the taillight housing out, and unsnap the bulb holder from the tail light housing, then remove the bulb by depressing and twisting. To replace the license plate light, remove the lens screws, lower the lamp from the body, separate the lens, and remove the bulb. For the back-up light on station wagon models, remove the retaining screws, press the bulb in, and rotate it to remove.