Is the renewal of the differential seal in the final drive unit a complex task that should be entrusted to a dealer on Mercedes-Benz 190E?

Renewal of the final drive unit oil seals is a complex task that requires partial dismantling of the final drive unit, so it is advisable to entrust this operation to a Mercedes-Benz dealer.

What procedure applies to the front and rear Differential Seal on Mercedes-Benz C230?

This is done on both the front pinion oil seal and rear pinion oil seal. First, make sure you can loosen up the wheel bolts; next, raise the front or the back of the car and hold it round against the jackstands without touching the other set of wheels since you will probably roll forward and back. Parking brake (and diff-lube) empty. Unscrew the driveshaft at the differential pinion flange and hold it clear with wire, rope, or other material. Use a small drift and hammer to loosen the two staked areas of the nut in the depressions before removing the large nut which clamps the driveshaft flange to the difference shaft. A small die grinder could be used if required. A three jaw flaked will assist to take the flange out of the pinion shaft. Very slowly use a screwdriver, prybar or seal removal tool to remove the seal without damaging the splines of the shaft. Install the new seal with either a seal driver or a deep socket that has a much larger outside diameter than that of the seal, driving it into the bore squarely until completely seated. Rewind the flange and nut and ensure that it is tightened to a recommended torque and punched so that its bar is fixed to the output shaft to avoid rotation. Install the driveshaft again and secure all the mounts to the respective torque values. Last, pour the differential with lubricating oil.

Genuine Mercedes-Benz Differential Seal

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

35 Differential Seals found

View related parts
Mercedes-Benz Differential Assembly Inner Seal
Part Number: 026-997-94-45
$3.17 MSRP: $4.40
You Save: $1.23 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: O-Ring
- Position: Inner
Fits the following Mercedes-Benz Models:
- C300 | 2017-2024 | 4Matic, Base | 4 Cyl 2.0 L GAS, 4 Cyl 2.0 L MILD HYBRID EV-GAS (MHEV)
- C350e | 2017-2018 | Base | 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV)
- C43 AMG | 2017-2024 | 4Matic | 4 Cyl 2.0 L MILD HYBRID EV-GAS (MHEV), 6 Cyl 3.0 L GAS
- C63 AMG | 2017-2021 | Base | 8 Cyl 4.0 L GAS
- C63 AMG S | 2023, 2017-2021 | Base | 8 Cyl 4.0 L GAS
- E300 | 2017-2019 | 4Matic, Base | 4 Cyl 2.0 L GAS
- E400 | 2017-2018 | 4Matic, Base | 6 Cyl 3.0 L GAS
- E43 AMG | 2017-2018 | 4Matic | 6 Cyl 3.0 L GAS
- E450 | 2019 | 4Matic | 6 Cyl 3.0 L GAS
- E53 AMG | 2019 | 4Matic | 6 Cyl 3.0 L MILD HYBRID EV-GAS (MHEV)
View More
View related parts
Mercedes-Benz Differential Assembly Inner Seal
Part Number: 221-353-02-59
$8.54 MSRP: $12.00
You Save: $3.46 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal Ring
Fits the following Mercedes-Benz Models:
- AMG GT 43 | 2021-2023 | Base | 6 Cyl 3.0 L MILD HYBRID EV-GAS (MHEV)
- AMG GT 53 | 2019-2023 | Base | 6 Cyl 3.0 L MILD HYBRID EV-GAS (MHEV)
- AMG GT 63 | 2023, 2019-2021 | Base | 8 Cyl 4.0 L GAS
- AMG GT 63 S | 2023, 2019-2021 | Base | 8 Cyl 4.0 L GAS
- AMG GT 63 S E Performance | 2023 | Base | 8 Cyl 4.0 L PLUG-IN HYBRID EV-GAS (PHEV)
- C300 | 2008-2018 | 4Matic, 4Matic Luxury, 4Matic Sport, Base | 4 Cyl 2.0 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS
- C350 | 2012-2015 | 4Matic, Base, Sport | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS
- C350e | 2016-2018 | Base | 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV)
- C400 | 2015 | 4Matic | 6 Cyl 3.0 L GAS
- C43 AMG | 2017-2018 | 4Matic | 6 Cyl 3.0 L GAS
View More
View related parts
Mercedes-Benz Flange Seal
Part Number: 015-997-48-46
$8.54 MSRP: $12.00
You Save: $3.46 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Radial Shaft Sealing Ring; Flange Seal, Seal
Fits the following Mercedes-Benz Models:
- C300 | 2017-2024 | 4Matic, Base | 4 Cyl 2.0 L GAS, 4 Cyl 2.0 L MILD HYBRID EV-GAS (MHEV)
- C43 AMG | 2023-2024 | 4Matic | 4 Cyl 2.0 L MILD HYBRID EV-GAS (MHEV), 6 Cyl 3.0 L GAS
- CLS450 | 2019-2021 | 4Matic, Base | 6 Cyl 3.0 L MILD HYBRID EV-GAS (MHEV)
- E300 | 2017-2019 | 4Matic, Base | 4 Cyl 2.0 L GAS
- E350 | 2020-2023 | 4Matic, Base | 4 Cyl 2.0 L GAS
- E400 | 2018 | 4Matic, Base | 6 Cyl 3.0 L GAS
- E43 AMG | 2017-2018 | 4Matic | 6 Cyl 3.0 L GAS
- E450 | 2019-2023 | 4Matic, Base | 6 Cyl 3.0 L GAS, 6 Cyl 3.0 L MILD HYBRID EV-GAS (MHEV)
- GLC300 | 2016-2023 | 4Matic, Base | 4 Cyl 2.0 L GAS, 4 Cyl 2.0 L MILD HYBRID EV-GAS (MHEV)
- GLC350e | 2018-2020 | 4Matic | 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV)
View More
View related parts
Mercedes-Benz Axle Seals
Part Number: 164-337-03-59
$8.91 MSRP: $12.50
You Save: $3.59 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Radial Seal Ring; Axle Seal, Side Seals
- Replaces: 164-337-03-59-64
Fits the following Mercedes-Benz Models:
- GL320 | 2007-2009 | Bluetec 4Matic, CDI | 6 Cyl 3.0 L DIESEL
- GL350 | 2010-2016 | Bluetec 4Matic | 6 Cyl 3.0 L DIESEL
- GL450 | 2007-2016 | 4Matic, Base | 6 Cyl 3.0 L GAS, 8 Cyl 4.7 L GAS
- GL550 | 2008-2016 | 4Matic, Base | 8 Cyl 4.7 L GAS, 8 Cyl 5.5 L GAS
- GL63 AMG | 2013-2016 | Base | 8 Cyl 5.5 L GAS
- GLE300d | 2016-2017 | 4Matic | 4 Cyl 2.1 L DIESEL
- GLE350 | 2020-2023, 2016-2018 | 4Matic, Base | 4 Cyl 2.0 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS
- GLE400 | 2019, 2016-2017 | 4Matic | 6 Cyl 3.0 L GAS
- GLE43 AMG | 2017-2019 | 4Matic | 6 Cyl 3.0 L GAS
- GLE450 | 2020-2022 | 4Matic | 6 Cyl 3.0 L MILD HYBRID EV-GAS (MHEV)
View More
View related parts
Mercedes-Benz Flange Seal
Part Number: 022-997-98-47-64
$23.79 MSRP: $32.50
You Save: $8.71 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal Ring; Axle Seal, Flange Seal
- Replaces: 022-997-98-47, 020-997-23-47, 014-997-61-47
Fits the following Mercedes-Benz Models:
- 190D | 1987 | 2.5 Turbo | 5 Cyl 2.5 L DIESEL
- 190E | 1986-1993 | 2.3, 2.3-16, 2.6 | 4 Cyl 2.3 L GAS, 6 Cyl 2.6 L GAS
- 300CD | 1984-1985 | Base | 5 Cyl 3.0 L DIESEL
- 300CE | 1988-1989 | Base | 6 Cyl 3.0 L GAS
- 300D | 1990-1993, 1987, 1984-1985 | 2.5, Base | 5 Cyl 2.5 L DIESEL, 5 Cyl 3.0 L DIESEL, 6 Cyl 3.0 L DIESEL
- 300E | 1986-1992 | 2.6, Base | 6 Cyl 2.6 L GAS, 6 Cyl 3.0 L GAS
- 300SD | 1984-1985 | Base | 5 Cyl 3.0 L DIESEL
- 300SDL | 1986-1987 | Base | 6 Cyl 3.0 L DIESEL
- 300SE | 1988-1991 | Base | 6 Cyl 3.0 L GAS
- 300SEL | 1988-1991 | Base | 6 Cyl 3.0 L GAS
View More
View related parts
Mercedes-Benz Axle Seals
Part Number: 025-997-27-47
$11.37 MSRP: $16.00
You Save: $4.63 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal Ring; Axle Seal, Seal
- Replaces: 024-997-98-47, 020-997-50-47, 024-997-47-47, 025-997-27-47-64
Fits the following Mercedes-Benz Models:
- C230 | 2003-2005 | Kompressor | 4 Cyl 1.8 L GAS
- C240 | 2001-2005 | 4Matic, Base | 6 Cyl 2.6 L GAS
- C32 AMG | 2002-2004 | Base | 6 Cyl 3.2 L GAS
- C320 | 2001-2005 | 4Matic, Base | 6 Cyl 3.2 L FLEX, 6 Cyl 3.2 L GAS
- C55 AMG | 2005 | Base | 8 Cyl 5.5 L GAS
- CL500 | 2000-2006 | Base | 8 Cyl 5.0 L GAS
- CL55 AMG | 2001-2006 | Base | 8 Cyl 5.5 L GAS
- CL600 | 2001-2006 | Base | 12 Cyl 5.5 L GAS, 12 Cyl 5.8 L GAS
- E320 | 2005-2006 | CDI | 6 Cyl 3.2 L DIESEL
- E350 | 2006 | 4Matic, Base | 6 Cyl 3.5 L GAS
View More
View related parts
Mercedes-Benz Axle Seals
Part Number: 164-337-01-59
$15.01 MSRP: $20.50
You Save: $5.49 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Radial Seal Ring; Axle Seal, Side Seals
Fits the following Mercedes-Benz Models:
- GL320 | 2007-2009 | Bluetec 4Matic, CDI | 6 Cyl 3.0 L DIESEL
- GL350 | 2010-2016 | Bluetec 4Matic | 6 Cyl 3.0 L DIESEL
- GL450 | 2007-2016 | 4Matic, Base | 6 Cyl 3.0 L GAS, 8 Cyl 4.7 L GAS
- GL550 | 2008-2016 | 4Matic, Base | 8 Cyl 4.7 L GAS, 8 Cyl 5.5 L GAS
- GL63 AMG | 2013-2016 | Base | 8 Cyl 5.5 L GAS
- GLE300d | 2016-2017 | 4Matic | 4 Cyl 2.1 L DIESEL
- GLE350 | 2020-2023, 2016-2018 | 4Matic, Base | 4 Cyl 2.0 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS
- GLE400 | 2019, 2016-2017 | 4Matic | 6 Cyl 3.0 L GAS
- GLE43 AMG | 2017-2019 | 4Matic | 6 Cyl 3.0 L GAS
- GLE450 | 2020-2022 | 4Matic | 6 Cyl 3.0 L MILD HYBRID EV-GAS (MHEV)
View More
View related parts
Mercedes-Benz Flange Seal
Part Number: 025-997-26-47
$14.64 MSRP: $20.00
You Save: $5.36 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal Ring
Fits the following Mercedes-Benz Models:
- C230 | 2006-2007 | Sport | 6 Cyl 2.5 L FLEX, 6 Cyl 2.5 L GAS
- C250 | 2012-2015 | Base, Luxury, Sport | 4 Cyl 1.8 L GAS
- C280 | 2006-2007 | 4Matic, Luxury | 6 Cyl 3.0 L GAS
- C300 | 2008-2017 | 4Matic, 4Matic Luxury, 4Matic Sport, Base, Luxury, Sport | 4 Cyl 2.0 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS
- C32 AMG | 2003-2004 | Base | 6 Cyl 3.2 L GAS
- C320 | 2003-2005 | 4Matic, Base | 6 Cyl 3.2 L FLEX, 6 Cyl 3.2 L GAS
- C350 | 2006-2015 | 4Matic, Base, Luxury, Sport | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS
- C55 AMG | 2006 | Base | 8 Cyl 5.5 L GAS
- CL550 | 2009-2014 | 4Matic | 8 Cyl 4.7 L GAS, 8 Cyl 5.5 L GAS
- CLK320 | 2005 | Base | 6 Cyl 3.2 L GAS
View More
View related parts
Mercedes-Benz Output Shaft Seal
Part Number: 164-337-00-59
$18.30 MSRP: $25.00
You Save: $6.70 (27%)
ADD TO CART
Product Specifications
- Other Name: Radial Seal Ring; Output Shaft Seal, Rear Seal
Fits the following Mercedes-Benz Models:
- GL320 | 2007-2009 | Bluetec 4Matic, CDI | 6 Cyl 3.0 L DIESEL
- GL350 | 2010-2016 | Bluetec 4Matic | 6 Cyl 3.0 L DIESEL
- GL450 | 2007-2016 | 4Matic, Base | 6 Cyl 3.0 L GAS, 8 Cyl 4.7 L GAS
- GL550 | 2008-2016 | 4Matic, Base | 8 Cyl 4.7 L GAS, 8 Cyl 5.5 L GAS
- GL63 AMG | 2013-2016 | Base | 8 Cyl 5.5 L GAS
- GLE300d | 2016-2017 | 4Matic | 4 Cyl 2.1 L DIESEL
- GLE350 | 2020-2023, 2016-2018 | 4Matic, Base | 4 Cyl 2.0 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS
- GLE400 | 2019, 2016-2017 | 4Matic | 6 Cyl 3.0 L GAS
- GLE43 AMG | 2017-2019 | 4Matic | 6 Cyl 3.0 L GAS
- GLE450 | 2020-2022 | 4Matic | 6 Cyl 3.0 L MILD HYBRID EV-GAS (MHEV)
View More
View related parts
Mercedes-Benz Flange Seal
Part Number: 246-997-01-46
$18.91 MSRP: $26.00
You Save: $7.09 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Radial Shaft Sealing Ring
- Replaced by: 246-997-01-46-64
- Replaces: 246-997-01-46-64
Fits the following Mercedes-Benz Models:
- GLA250 | 2015-2020 | 4Matic, Base | 4 Cyl 2.0 L FLEX, 4 Cyl 2.0 L GAS
- GLA45 AMG | 2015-2019 | 4Matic | 4 Cyl 2.0 L GAS
View related parts
Mercedes-Benz Seal
Part Number: 003-997-25-48
$4.27 MSRP: $6.00
You Save: $1.73 (29%)
ADD TO CART
Product Specifications
- Other Name: Seal Ring, Vlrub
Fits the following Mercedes-Benz Models:
- SL550 | 2013-2020 | Base | 8 Cyl 4.7 L GAS
- SL63 AMG | 2013-2019 | Base | 8 Cyl 5.5 L GAS
- SL65 AMG | 2013-2018 | Base | 12 Cyl 6.0 L GAS
View More
View related parts
Mercedes-Benz Flange Seal
Part Number: 205-997-01-46
$5.73 MSRP: $8.00
You Save: $2.27 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Radial Shaft Sealing Ring; Pinion Seal
Fits the following Mercedes-Benz Models:
- C300 | 2015-2024 | 4Matic, Base | 4 Cyl 2.0 L GAS, 4 Cyl 2.0 L MILD HYBRID EV-GAS (MHEV)
- C400 | 2015 | 4Matic | 6 Cyl 3.0 L GAS
- C43 AMG | 2017-2023 | 4Matic | 4 Cyl 2.0 L MILD HYBRID EV-GAS (MHEV), 6 Cyl 3.0 L GAS
- C450 AMG | 2016 | 4Matic | 6 Cyl 3.0 L GAS
- CLS450 | 2019-2023 | 4Matic, Base | 6 Cyl 3.0 L MILD HYBRID EV-GAS (MHEV)
- E300 | 2017-2019 | 4Matic, Base | 4 Cyl 2.0 L GAS
- E350 | 2020-2022 | 4Matic, Base | 4 Cyl 2.0 L GAS
- E400 | 2017-2018 | 4Matic, Base | 6 Cyl 3.0 L GAS
- E450 | 2019-2023 | 4Matic, Base | 6 Cyl 3.0 L GAS, 6 Cyl 3.0 L MILD HYBRID EV-GAS (MHEV)
- E53 AMG | 2019 | 4Matic | 6 Cyl 3.0 L MILD HYBRID EV-GAS (MHEV)
View More
View related parts
Mercedes-Benz Pinion Seal
Part Number: 164-337-02-59
$11.22 MSRP: $15.50
You Save: $4.28 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Radial Seal Ring
Fits the following Mercedes-Benz Models:
- GL320 | 2007-2009 | Bluetec 4Matic, CDI | 6 Cyl 3.0 L DIESEL
- GL350 | 2010-2012 | Bluetec 4Matic | 6 Cyl 3.0 L DIESEL
- GL450 | 2007-2012 | Base | 8 Cyl 4.7 L GAS
- GL550 | 2008-2012 | Base | 8 Cyl 5.5 L GAS
- ML320 | 2007-2009 | Bluetec 4Matic, CDI | 6 Cyl 3.0 L DIESEL
- ML350 | 2006-2011 | 4Matic, Base, Bluetec 4Matic | 6 Cyl 3.0 L DIESEL, 6 Cyl 3.5 L GAS
- ML450 | 2010-2011 | Hybrid 4Matic | 6 Cyl 3.5 L FULL HYBRID EV-GAS (FHEV)
- ML500 | 2006-2007 | Base | 8 Cyl 5.0 L GAS
- ML550 | 2008-2011 | Base | 8 Cyl 5.5 L GAS
- ML63 AMG | 2007-2011 | Base | 8 Cyl 6.3 L GAS
View More
View related parts
Mercedes-Benz Cover Gasket
Part Number: 906-351-00-80
$14.64 MSRP: $20.00
You Save: $5.36 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Gasket; Cover Gasket
Fits the following Mercedes-Benz Models:
- G550 | 2019-2023 | Base | 8 Cyl 4.0 L GAS
- G63 AMG | 2019-2023 | Base | 8 Cyl 4.0 L GAS
- Sprinter 2500 | 2014-2018 | Base | 4 Cyl 2.1 L DIESEL, 6 Cyl 3.0 L DIESEL
- Sprinter 3500 | 2014-2018 | Base | 4 Cyl 2.1 L DIESEL, 6 Cyl 3.0 L DIESEL
View More
View related parts
Mercedes-Benz Pinion Seal
Part Number: 015-997-22-47
$17.08 MSRP: $23.50
You Save: $6.42 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal Ring, Vlrub; Pinion Seal
Fits the following Mercedes-Benz Models:
- 500SL | 1993 | Base | 8 Cyl 5.0 L GAS
- 600SL | 1993 | Base | 12 Cyl 6.0 L GAS
- SL500 | 1994-1998 | Base | 8 Cyl 5.0 L GAS
- SL600 | 1994-1998 | Base | 12 Cyl 6.0 L GAS
View More
View related parts
Mercedes-Benz Flange Seal
Part Number: 020-997-25-47-64
$12.20 MSRP: $17.00
You Save: $4.80 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sealing Ring; Axle Seal, Flange Seal
- Replaces: 020-997-25-47, 014-997-62-47
Fits the following Mercedes-Benz Models:
- 300CE | 1990-1993 | Base | 6 Cyl 3.0 L GAS, 6 Cyl 3.2 L GAS
- 300SD | 1992-1993 | Base | 6 Cyl 3.4 L DIESEL
- 350SD | 1991 | Base | 6 Cyl 3.4 L DIESEL
- 350SDL | 1991 | Base | 6 Cyl 3.4 L DIESEL
- 400E | 1992-1993 | Base | 8 Cyl 4.2 L GAS
- 400SE | 1992 | Base | 8 Cyl 4.2 L GAS
- 400SEL | 1993 | Base | 8 Cyl 4.2 L GAS
- 420SEL | 1990-1991 | Base | 8 Cyl 4.2 L GAS
- 500E | 1992-1993 | Base | 8 Cyl 5.0 L GAS
- 560SEC | 1990-1991 | Base | 8 Cyl 5.6 L GAS
View More
View related parts
Mercedes-Benz Pinion Seal
Part Number: 164-337-04-59
$18.91 MSRP: $26.00
You Save: $7.09 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Radial Seal Ring
Fits the following Mercedes-Benz Models:
- GL320 | 2007-2009 | Bluetec 4Matic, CDI | 6 Cyl 3.0 L DIESEL
- GL350 | 2010-2012 | Bluetec 4Matic | 6 Cyl 3.0 L DIESEL
- GL450 | 2007-2012 | Base | 8 Cyl 4.7 L GAS
- GL550 | 2008-2012 | Base | 8 Cyl 5.5 L GAS
- ML320 | 2007-2009 | Bluetec 4Matic, CDI | 6 Cyl 3.0 L DIESEL
- ML350 | 2007-2011 | 4Matic, Base, Bluetec 4Matic | 6 Cyl 3.0 L DIESEL, 6 Cyl 3.5 L GAS
- ML500 | 2007 | Base | 8 Cyl 5.0 L GAS
- ML550 | 2008-2011 | Base | 8 Cyl 5.5 L GAS
- ML63 AMG | 2007-2011 | Base | 8 Cyl 6.3 L GAS
View More
View related parts
Mercedes-Benz Front Pinion Bearing
Part Number: 024-997-99-47
$14.03 MSRP: $19.50
You Save: $5.47 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal Ring; Front Pinion Bearing, Seal
- Replaced by: 024-997-99-47-64
- Replaces: 024-997-45-47, 020-997-63-47, 024-997-99-47-64
Fits the following Mercedes-Benz Models:
- C250 | 2012-2015 | Base, Luxury, Sport | 4 Cyl 1.8 L GAS
- C300 | 2008-2017 | 4Matic, 4Matic Luxury, 4Matic Sport, Base, Luxury, Sport | 4 Cyl 2.0 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS
- C32 AMG | 2002-2004 | Base | 6 Cyl 3.2 L GAS
- C320 | 2001-2005 | 4Matic, Base | 6 Cyl 3.2 L FLEX, 6 Cyl 3.2 L GAS
- C350 | 2008-2015 | Base, Sport | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS
- CL500 | 2000-2006 | Base | 8 Cyl 5.0 L GAS
- CL55 AMG | 2001-2006 | Base | 8 Cyl 5.5 L GAS
- CL550 | 2011-2014 | 4Matic | 8 Cyl 4.7 L GAS
- CL600 | 2001-2006 | Base | 12 Cyl 5.5 L GAS, 12 Cyl 5.8 L GAS
- CLK320 | 2005, 1998-2003 | Base | 6 Cyl 3.2 L GAS
View More
View related parts
Mercedes-Benz Axle Seals
Part Number: 211-997-01-46
$16.47 MSRP: $22.50
You Save: $6.03 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal Ring; Axle Seal, Seal, Side Seal
Fits the following Mercedes-Benz Models:
- C230 | 2002-2007 | Kompressor, Sport | 4 Cyl 1.8 L GAS, 4 Cyl 2.3 L GAS, 6 Cyl 2.5 L FLEX, 6 Cyl 2.5 L GAS
- C240 | 2003-2005 | 4Matic, Base | 6 Cyl 2.6 L GAS
- C280 | 2006-2007 | 4Matic, Luxury | 6 Cyl 3.0 L GAS
- C300 | 2017, 2008-2014 | 4Matic, 4Matic Luxury, 4Matic Sport, Luxury, Sport | 4 Cyl 2.0 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS
- C32 AMG | 2003-2004 | Base | 6 Cyl 3.2 L GAS
- C320 | 2003-2005 | 4Matic, Base | 6 Cyl 3.2 L FLEX, 6 Cyl 3.2 L GAS
- C350 | 2012-2015, 2006-2007 | 4Matic, Base, Luxury, Sport | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS
- C55 AMG | 2005-2006 | Base | 8 Cyl 5.5 L GAS
- CLS400 | 2015-2017 | 4Matic, Base | 6 Cyl 3.0 L GAS
- E250 | 2014-2016 | Bluetec 4Matic | 4 Cyl 2.1 L DIESEL
View More
View related parts
Mercedes-Benz Flange Seal
Part Number: 230-997-02-46-64
$21.96 MSRP: $30.00
You Save: $8.04 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal Ring; Flange Seal, Pinion Seal, Seal
- Replaces: 230-997-02-46
Fits the following Mercedes-Benz Models:
- AMG GT 43 | 2021-2023 | Base | 6 Cyl 3.0 L MILD HYBRID EV-GAS (MHEV)
- AMG GT 53 | 2019-2023 | Base | 6 Cyl 3.0 L MILD HYBRID EV-GAS (MHEV)
- C350e | 2016-2018 | Base | 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV)
- C63 AMG | 2008-2021 | Base, Black Series | 8 Cyl 4.0 L GAS, 8 Cyl 6.3 L GAS
- C63 AMG S | 2023, 2015-2021 | Base | 8 Cyl 4.0 L GAS
- CL550 | 2007-2010 | 4Matic, Base | 8 Cyl 5.5 L GAS
- CL63 AMG | 2008-2010 | Base | 8 Cyl 6.3 L GAS
- CLK63 AMG | 2007-2008 | Base, Black Series | 8 Cyl 6.3 L GAS
- CLS400 | 2017 | 4Matic, Base | 6 Cyl 3.0 L GAS
- CLS500 | 2006 | Base | 8 Cyl 5.0 L GAS
View More

| Page 1 of 2 |Next >

1-20 of 35 Results

Mercedes-Benz Differential Seal

Every part of the automobile matters, and their maintenance is crucial for the health of your vehicle. Moreover, a faulted Mercedes-Benz Differential Seal can impact its functionality as well as lead to system-wide problems that may endanger safety. Thus, it is imperative that one repairs or replaces failing parts for better driving experiences. Why go for OEM Mercedes-Benz Differential Seals? Because they are the optimal solutions, fit your vehicle perfectly, and are easy to install. Therefore, these factors help maintain the dependability and performance of your vehicle. At MBPartsGiant.com, you may find all the required genuine parts for your Mercedes-Benz. They are delivered from authorized Mercedes-Benz dealers directly via an uncomplicated online catalog. We guarantee promptness, reliability, and cheap sales on the Mercedes-Benz Differential Seal, and we always provide you with the right part at any time. Depend on our genuine Mercedes-Benz Differential Seals to keep your vehicle running smoothly.

Mercedes-Benz Differential Seal Parts and Q&A

Flange Seal
022-997-98-47-64
Q: Is the renewal of the differential seal in the final drive unit a complex task that should be entrusted to a dealer on Mercedes-Benz 190E?
A:
Renewal of the final drive unit oil seals is a complex task that requires partial dismantling of the final drive unit, so it is advisable to entrust this operation to a Mercedes-Benz dealer.
Pinion Seal
025-997-00-47
Q: What procedure applies to the front and rear Differential Seal on Mercedes-Benz C230?
A:
This is done on both the front pinion oil seal and rear pinion oil seal. First, make sure you can loosen up the wheel bolts; next, raise the front or the back of the car and hold it round against the jackstands without touching the other set of wheels since you will probably roll forward and back. Parking brake (and diff-lube) empty. Unscrew the driveshaft at the differential pinion flange and hold it clear with wire, rope, or other material. Use a small drift and hammer to loosen the two staked areas of the nut in the depressions before removing the large nut which clamps the driveshaft flange to the difference shaft. A small die grinder could be used if required. A three jaw flaked will assist to take the flange out of the pinion shaft. Very slowly use a screwdriver, prybar or seal removal tool to remove the seal without damaging the splines of the shaft. Install the new seal with either a seal driver or a deep socket that has a much larger outside diameter than that of the seal, driving it into the bore squarely until completely seated. Rewind the flange and nut and ensure that it is tightened to a recommended torque and punched so that its bar is fixed to the output shaft to avoid rotation. Install the driveshaft again and secure all the mounts to the respective torque values. Last, pour the differential with lubricating oil.

Related Mercedes-Benz Parts

Browse by Model