How should the Driveshaft Center Support Bearing be checked and renewed on Mercedes-Benz 190E?

Tear on the Driveshaft Center Support Bearing may lead to noises and vibrations during the run of the vehicle, and the driveshaft should be removed when checking the bearing. Rotate the bearing alternatively, holding it so that it can move freely without any freeplay; when difficulty is encountered in the rotation or a gritty feeling is present, then the bearing has to be changed. Check the rubber part for cracking or decay, which also requires renewal. To perform the renewal, a puller, hydraulic press, and appropriate spacers will be needed; in the absence of such equipment, it is better to turn to a Mercedes-Benz dealer. Start by stripping the driveshaft and creating alignment marks between the front and back sections; a few models already have alignment marks. Unscrew the threaded sleeve nut to which the rubber gaiter is attached, completely slacken the nut, and separate the two portions of the shaft. Optional: Unhook the rubber gaiter at the back fitting and then use a legged puller that fits on the end of the shaft to loosen the center mounting assembly by pulling it out, marking the direction the bracket was. Recover the front and rear bearing covers, support mounting bracket assembly, and carefully press the bearing out with a tubular drift. Check all parts for wear or spoilage, renewing as necessary; ensure that bearing protectors and the covering of the gaiter of a pivot are regularly changed, whether in good condition or not. Firmly hold up the mounting bracket and force the new bearing to fit in place with a tubular drift that actually comes into contact with the bearing outer race. Clean the driveshaft and secure the new rear protective cap, ensuring that the mounting bracket is properly in place, then clamp the assembly completely onto the shaft with the tubular drift only touching the inner race of the bearing. Install the new protective cap on top of the front and place the fitted new rubber gaiter in the shaft gully. Add a layer of molybdenum disulphide grease to the driveshaft splines, then proceed to slip the two halves of the driveshaft together, taking care that the alignment marks are all aligned properly. Lastly, install the rubber gaiter according to the threaded sleeve nut groove and reinstall the driveshaft.

How to replace a Driveshaft Center Support Bearing on Mercedes-Benz C230?

Raise the vehicle and support it securely on jackstands. Remove the driveshaft assembly, marking the relationship of the front portion to the rear portion. Separate the rear driveshaft and the front driveshaft at the slide connection. Take the driveshaft and center bearing to an automotive machine shop to have the old bearing pressed off and a new bearing pressed on. Installation is the reverse of removal, ensuring that the match marks line up for proper phasing of the driveshaft.

Genuine Mercedes-Benz Driveshaft Center Support Bearing

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

28 Driveshaft Center Support Bearings found

View related parts
Mercedes-Benz Center Bearing
Part Number: 008-981-43-25
$29.89 MSRP: $41.00
You Save: $11.11 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Ball Bearing; Bearing
- Position: Center
- Replaces: 003-981-23-25
Fits the following Mercedes-Benz Models:
- 300SL | 1991-1993 | Base | 6 Cyl 3.0 L GAS
- 300TE | 1990-1993 | 4Matic, Base | 6 Cyl 3.0 L GAS, 6 Cyl 3.2 L GAS
- 500SL | 1991-1993 | Base | 8 Cyl 5.0 L GAS
- 600SL | 1993 | Base | 12 Cyl 6.0 L GAS
- C230 | 2002-2007, 1999-2000 | Kompressor, Sport | 4 Cyl 1.8 L GAS, 4 Cyl 2.3 L GAS, 6 Cyl 2.5 L FLEX, 6 Cyl 2.5 L GAS
- C240 | 2001-2005 | Base | 6 Cyl 2.6 L GAS
- C250 | 2012-2015 | Base, Luxury, Sport | 4 Cyl 1.8 L GAS
- C280 | 2006-2007, 1994-2000 | 4Matic, Base, Luxury | 6 Cyl 2.8 L GAS, 6 Cyl 3.0 L GAS
- C300 | 2012-2023, 2008-2010 | 4Matic, 4Matic Luxury, 4Matic Sport, Base, Luxury, Sport | 4 Cyl 2.0 L GAS, 4 Cyl 2.0 L MILD HYBRID EV-GAS (MHEV), 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS
- C32 AMG | 2002-2004 | Base | 6 Cyl 3.2 L GAS
View More
View related parts
Mercedes-Benz Bearing Assembly
Part Number: 205-410-82-01
$33.55 MSRP: $46.00
You Save: $12.45 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Wrinkle Bearing; Bearing Assembly
Fits the following Mercedes-Benz Models:
- E300 | 2017-2019 | 4Matic, Base | 4 Cyl 2.0 L GAS
- E350 | 2020-2023 | 4Matic, Base | 4 Cyl 2.0 L GAS
View related parts
Mercedes-Benz Center Bearing
Part Number: 008-981-51-25-64
$31.72 MSRP: $43.50
You Save: $11.78 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Grooved Ball Bearing; Bearing, Center Bearing
- Replaces: 008-981-51-25
Fits the following Mercedes-Benz Models:
- C300 | 2010-2011 | 4Matic Luxury, 4Matic Sport, Luxury, Sport | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
- C350 | 2010-2011 | Sport | 6 Cyl 3.5 L GAS
- C63 AMG | 2010-2021 | Base, Black Series | 8 Cyl 4.0 L GAS, 8 Cyl 6.3 L GAS
- C63 AMG S | 2023, 2015-2021 | Base | 8 Cyl 4.0 L GAS
- CL550 | 2007-2008 | Base | 8 Cyl 5.5 L GAS
- CL600 | 2007-2014 | Base | 12 Cyl 5.5 L GAS
- CL63 AMG | 2008-2014 | Base | 8 Cyl 5.5 L GAS, 8 Cyl 6.3 L GAS
- CL65 AMG | 2008-2014 | Base | 12 Cyl 6.0 L GAS
- CLS550 | 2012-2018 | 4Matic, Base | 8 Cyl 4.7 L GAS
- CLS63 AMG | 2007-2014 | 4Matic, Base | 8 Cyl 5.5 L GAS, 8 Cyl 6.3 L GAS
View More
View related parts
Mercedes-Benz Center Bearing
Part Number: 205-410-81-01
$45.00 MSRP: $63.00
You Save: $18.00 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Wrinkle Bearing; Bearing Assembly, Center Bearing
Fits the following Mercedes-Benz Models:
- C300 | 2015-2017 | 4Matic, Base | 4 Cyl 2.0 L GAS
- CLS450 | 2019-2023 | 4Matic, Base | 6 Cyl 3.0 L MILD HYBRID EV-GAS (MHEV)
- CLS53 AMG | 2019-2021 | 4Matic | 6 Cyl 3.0 L MILD HYBRID EV-GAS (MHEV)
- E43 AMG | 2017-2018 | 4Matic | 6 Cyl 3.0 L GAS
- E450 | 2021-2023 | 4Matic | 6 Cyl 3.0 L MILD HYBRID EV-GAS (MHEV)
View More
View related parts
Mercedes-Benz Center Bearing
Part Number: 205-410-33-02
$41.40 MSRP: $58.00
You Save: $16.60 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Wrinkle Bearing; Bearing Assembly
- Position: Center
Fits the following Mercedes-Benz Models:
- C43 AMG | 2017-2023 | 4Matic | 4 Cyl 2.0 L MILD HYBRID EV-GAS (MHEV), 6 Cyl 3.0 L GAS
- C63 AMG | 2016-2021 | Base | 8 Cyl 4.0 L GAS
- C63 AMG S | 2023, 2015-2021 | Base | 8 Cyl 4.0 L GAS
- E63 AMG S | 2018-2021 | 4Matic | 8 Cyl 4.0 L GAS
View More
View related parts
Mercedes-Benz Center Bearing
Part Number: 205-410-80-01
$60.00 MSRP: $84.00
You Save: $24.00 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Wrinkle Bearing; Bearing Assembly, Center Bearing
Fits the following Mercedes-Benz Models:
- C300 | 2017-2023 | 4Matic, Base | 4 Cyl 2.0 L GAS, 4 Cyl 2.0 L MILD HYBRID EV-GAS (MHEV)
- C350e | 2016-2018 | Base | 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV)
- CLS450 | 2019-2021 | 4Matic, Base | 6 Cyl 3.0 L MILD HYBRID EV-GAS (MHEV)
- E400 | 2017-2018 | 4Matic, Base | 6 Cyl 3.0 L GAS
- E450 | 2019-2023 | 4Matic, Base | 6 Cyl 3.0 L GAS, 6 Cyl 3.0 L MILD HYBRID EV-GAS (MHEV)
View More
View related parts
Mercedes-Benz Center Bearing
Part Number: 205-410-79-01
$54.60 MSRP: $76.00
You Save: $21.40 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Wrinkle Bearing; Bearing Assembly, Center Bearing
Fits the following Mercedes-Benz Models:
- C300 | 2017-2023 | 4Matic, Base | 4 Cyl 2.0 L GAS, 4 Cyl 2.0 L MILD HYBRID EV-GAS (MHEV)
- C400 | 2015 | 4Matic | 6 Cyl 3.0 L GAS
- C43 AMG | 2017-2018 | 4Matic | 6 Cyl 3.0 L GAS
- C450 AMG | 2016 | 4Matic | 6 Cyl 3.0 L GAS
- E400 | 2018 | 4Matic, Base | 6 Cyl 3.0 L GAS
- E450 | 2019-2023 | 4Matic, Base | 6 Cyl 3.0 L GAS, 6 Cyl 3.0 L MILD HYBRID EV-GAS (MHEV)
View More
View related parts
Mercedes-Benz Center Bearing
Part Number: 206-410-46-00
$105.60 MSRP: $147.00
You Save: $41.40 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Center Support Bearing; Bearing Assembly, Center Bearing
- Position: Center
Fits the following Mercedes-Benz Models:
- C300 | 2022-2024 | 4Matic | 4 Cyl 2.0 L GAS, 4 Cyl 2.0 L MILD HYBRID EV-GAS (MHEV)
View related parts
Mercedes-Benz Center Bearing
Part Number: 206-410-47-00
$98.40 MSRP: $137.00
You Save: $38.60 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Center Support Bearing; Bearing Assembly, Center Bearing
- Position: Center
Fits the following Mercedes-Benz Models:
- C300 | 2022-2024 | Base | 4 Cyl 2.0 L GAS, 4 Cyl 2.0 L MILD HYBRID EV-GAS (MHEV)
View related parts
Mercedes-Benz Center Bearing
Part Number: 223-410-00-02
$192.00 MSRP: $268.00
You Save: $76.00 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Center Support Bearing; Bearing Assembly, Center Bearing
- Position: Center
Fits the following Mercedes-Benz Models:
- S500 | 2021-2023 | 4Matic | 6 Cyl 3.0 L MILD HYBRID EV-GAS (MHEV)
- S580 | 2021-2023 | 4Matic | 8 Cyl 4.0 L MILD HYBRID EV-GAS (MHEV)
- S580e | 2023 | 4Matic | 6 Cyl 3.0 L PLUG-IN HYBRID EV-GAS (PHEV)
View More
View related parts
Mercedes-Benz Center Bearing
Part Number: 201-981-00-25-64
$34.77 MSRP: $47.50
You Save: $12.73 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Ball Bearing; Center Bearing
- Replaces: 201-981-00-25
Fits the following Mercedes-Benz Models:
- 190D | 1984-1989 | 2.2, 2.5, 2.5 Turbo | 4 Cyl 2.2 L DIESEL, 5 Cyl 2.5 L DIESEL
- 190E | 1984-1993 | 2.3, 2.3-16, 2.6 | 4 Cyl 2.3 L GAS, 6 Cyl 2.6 L GAS
- 300E | 1990-1992 | 2.6 | 6 Cyl 2.6 L GAS
- C220 | 1994-1996 | Base | 4 Cyl 2.2 L GAS
- C230 | 1997-1998 | Base | 4 Cyl 2.3 L GAS
- C240 | 2003-2005 | 4Matic, Base | 6 Cyl 2.6 L GAS
- C320 | 2003-2005 | 4Matic, Base | 6 Cyl 3.2 L FLEX, 6 Cyl 3.2 L GAS
- E320 | 1998-2003 | 4Matic, Base | 6 Cyl 3.2 L GAS
View More
View related parts
Mercedes-Benz Bearing Support
Part Number: 230-410-01-81
$35.99 MSRP: $49.50
You Save: $13.51 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rubber Boot Bearing; Bearing Support
Fits the following Mercedes-Benz Models:
- CLK500 | 2003-2006 | Base | 8 Cyl 5.0 L GAS
- CLK63 AMG | 2007-2008 | Base, Black Series | 8 Cyl 6.3 L GAS
View related parts
Mercedes-Benz Center Bearing
Part Number: 202-410-04-81
$59.40 MSRP: $83.00
You Save: $23.60 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rubber-Mounting
- Position: Center
- Replaces: 202-410-02-81
Fits the following Mercedes-Benz Models:
- CLK320 | 1998-2003 | Base | 6 Cyl 3.2 L GAS
- CLK430 | 1999-2003 | Base | 8 Cyl 4.3 L GAS
View related parts
Mercedes-Benz Center Bearing
Part Number: 204-410-24-81
$58.20 MSRP: $81.00
You Save: $22.80 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Fold. Bearing Package
- Position: Center
Fits the following Mercedes-Benz Models:
- GLK350 | 2010-2012 | Base | 6 Cyl 3.5 L GAS
View related parts
Mercedes-Benz Bearing Support
Part Number: 210-410-18-81
$164.40 MSRP: $230.00
You Save: $65.60 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rubber-Mounting
Fits the following Mercedes-Benz Models:
- E320 | 1998-2000 | 4Matic, Base | 6 Cyl 3.2 L GAS
View related parts
Mercedes-Benz Bearing Support
Part Number: 170-410-00-81
$66.00 MSRP: $92.00
You Save: $26.00 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rubber Boot Bearing; Bearing Support, Center Bearing
Fits the following Mercedes-Benz Models:
- CLK320 | 2005 | Base | 6 Cyl 3.2 L GAS
- SLK320 | 2001 | Base | 6 Cyl 3.2 L GAS
View related parts
Mercedes-Benz Center Bearing
Part Number: 124-410-07-81
$133.20 MSRP: $185.00
You Save: $51.80 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rubber-Mounting; Center Bearing
- Replaces: 124-410-02-81
Fits the following Mercedes-Benz Models:
- 420SEL | 1986-1989 | Base | 8 Cyl 4.2 L GAS
- 560SEC | 1986-1989 | Base | 8 Cyl 5.6 L GAS
- 560SEL | 1986-1989 | Base | 8 Cyl 5.6 L GAS
- 560SL | 1986-1989 | Base | 8 Cyl 5.6 L GAS
View More
View related parts
Mercedes-Benz Center Bearing
Part Number: 204-410-23-81
$88.80 MSRP: $124.00
You Save: $35.20 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Fold. Bearing Package
- Position: Center
Fits the following Mercedes-Benz Models:
- GLK350 | 2010-2012 | 4Matic | 6 Cyl 3.5 L GAS
View related parts
Mercedes-Benz Bearing Support
Part Number: 170-410-01-81
$81.60 MSRP: $114.00
You Save: $32.40 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rubber Boot Bearing; Bearing Support
Fits the following Mercedes-Benz Models:
- CLK350 | 2006-2009 | Base | 6 Cyl 3.5 L GAS
View related parts
Mercedes-Benz Center Bearing
Part Number: 126-410-01-81
$250.80 MSRP: $350.00
You Save: $99.20 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Mount, Driveshaft Hanger, Vlrub
- Position: Center
Fits the following Mercedes-Benz Models:
- 380SE | 1984-1985 | Base | 8 Cyl 3.8 L GAS
- 380SL | 1984-1985 | Base | 8 Cyl 3.8 L GAS
- 500SEC | 1984-1985 | Base | 8 Cyl 5.0 L GAS
- 500SEL | 1984-1985 | Base | 8 Cyl 5.0 L GAS
View More

| Page 1 of 2 |Next >

1-20 of 28 Results

Mercedes-Benz Driveshaft Center Support Bearing

The Mercedes-Benz Driveshaft Center Support Bearing helps keep the long driveshaft stable and spinning true, reducing vibration and protecting the silky ride that owners expect. Across the brand, this little but very important part is in the middle of the transmission and the differential, locking the shaft in a rubber cushioned ball bearing so each half can rotate without wobble, which would make it shudder at low speed and hum at highway pace. Since it keeps everything aligned, even when the suspension moves, it also reduces stress on U-joints and prolongs their life, making acceleration smoother and cabin noise less for drivers everywhere. Durability comes from a simple pressed steel case and resilient rubber that defends the bearing from road splash and keeps grease where it belongs so that service life often matches the long touring ambitions shared by all models. While this unobtrusive part works behind the scenes, Mercedes-Benz headlines cutting edge technology in full view. Since 1926, the German maker has combined style and engineering, and recent achievements demonstrate that the momentum is maintained. The intuitive MBUX infotainment system responds to natural voice commands, the MB.OS platform brings driver assist, battery management, and artificial intelligence together, and energy recovery systems convert braking force into extra range in electric and hybrid options. Sleek body lines combine with digital innovation and provide teens and adults alike with a clear picture of how tradition and progress go hand in hand. Thanks to the reliable Driveshaft Center Support Bearing, that forward thinking rides on a foundation of mechanical refinement.

Genuine parts are built to last. These components go through tough factory testing, so you can trust they will hold up over time. At MBPartsGiant.com, finding Mercedes-Benz Driveshaft Center Support Bearing is quick and simple. We keep a massive inventory in stock with low prices that are hard to beat. Just order online to get a real manufacturer's warranty with every single part. Returns won't be a headache either, thanks to our no-hassle policy. If you are in a rush, we provide expedited shipping to get your vehicle back on the road. Don't wait. Finish your repairs today and keep your Mercedes-Benz running like new. Explore the catalog now.

Mercedes-Benz Driveshaft Center Support Bearing Parts and Q&A

Center Bearing
201-981-00-25-64
Q: How should the Driveshaft Center Support Bearing be checked and renewed on Mercedes-Benz 190E?
A:
Tear on the Driveshaft Center Support Bearing may lead to noises and vibrations during the run of the vehicle, and the driveshaft should be removed when checking the bearing. Rotate the bearing alternatively, holding it so that it can move freely without any freeplay; when difficulty is encountered in the rotation or a gritty feeling is present, then the bearing has to be changed. Check the rubber part for cracking or decay, which also requires renewal. To perform the renewal, a puller, hydraulic press, and appropriate spacers will be needed; in the absence of such equipment, it is better to turn to a Mercedes-Benz dealer. Start by stripping the driveshaft and creating alignment marks between the front and back sections; a few models already have alignment marks. Unscrew the threaded sleeve nut to which the rubber gaiter is attached, completely slacken the nut, and separate the two portions of the shaft. Optional: Unhook the rubber gaiter at the back fitting and then use a legged puller that fits on the end of the shaft to loosen the center mounting assembly by pulling it out, marking the direction the bracket was. Recover the front and rear bearing covers, support mounting bracket assembly, and carefully press the bearing out with a tubular drift. Check all parts for wear or spoilage, renewing as necessary; ensure that bearing protectors and the covering of the gaiter of a pivot are regularly changed, whether in good condition or not. Firmly hold up the mounting bracket and force the new bearing to fit in place with a tubular drift that actually comes into contact with the bearing outer race. Clean the driveshaft and secure the new rear protective cap, ensuring that the mounting bracket is properly in place, then clamp the assembly completely onto the shaft with the tubular drift only touching the inner race of the bearing. Install the new protective cap on top of the front and place the fitted new rubber gaiter in the shaft gully. Add a layer of molybdenum disulphide grease to the driveshaft splines, then proceed to slip the two halves of the driveshaft together, taking care that the alignment marks are all aligned properly. Lastly, install the rubber gaiter according to the threaded sleeve nut groove and reinstall the driveshaft.
Center Bearing
008-981-43-25
Q: How to replace a Driveshaft Center Support Bearing on Mercedes-Benz C230?
A:
Raise the vehicle and support it securely on jackstands. Remove the driveshaft assembly, marking the relationship of the front portion to the rear portion. Separate the rear driveshaft and the front driveshaft at the slide connection. Take the driveshaft and center bearing to an automotive machine shop to have the old bearing pressed off and a new bearing pressed on. Installation is the reverse of removal, ensuring that the match marks line up for proper phasing of the driveshaft.

Related Mercedes-Benz Parts

Browse by Model