How to remove and inspect the front Sway Bar, Sway Bar Bushing and Sway Bar Link on Mercedes-Benz C230?

Lift the front of the car and rest it low on jackstands, then take off the front wheels, but set the jackstands up against the frame and not on anything in the suspension. Take out a vehicle undercarriage splash screen. Then unscrew the lower nut in each stabilizer bar link and also all the links of the bar, checking the little boots to see whether they are damaged or worn, and replacing them, as needed; the links may be completely removed by parting them out of the strut assemblies. Remove the fasteners of the stabilizer bar bracket along with the bracket, taking care with models with bi-xenon headlamps that there is a sensor and linkage installed to the stabilizer bar; make a note of where the sensor linkage is before carefully removing it. Removing the stabilizer bar and the rubber bushings of the stabilizer bar of rear-wheel drive models. Removal of the stabilizer bar in 4MATIC floor processes necessitize lowering the sub frame but stabilising the engine weight at the top, making the work demanding in terms of procedures and safety measures; it is always recommended that when the vehicle is suspected to be damaged to be inspected at a qualified body repair business. Wipe down the entire stabilizer bar that touches the bushings and check all the bushings, replacing any broken, tainted, or damaged strands of rubber. Check every stabilizer link due to excessive wear, replace where required then re-fit in reverse order in which they were removed and make sure that all sources are tightened with the appropriate torque.

How to properly remove and replace the rear Sway Bar, Sway Bar Bushing and Sway Bar Link on Mercedes-Benz C280?

Lift up the back of the vehicle and then place it safely on jackstands; remember that the jacks should be under the frame and not under any of the suspension components. Take the bottom nut off each stabilizer bar join and remove the links off the bar, examining the little boots to see if there is any damage or wear and a replacement is may be required. Unscrew the stabilizer bar bracket connectors and take the brackets off (removing the stabilizer bar itself and rubber bushings). Clean the point of contact at the stabilizer bar and check all bushings to ensure wear and both internal and external damage, and change any broken, shredded, or worn out pieces of rubber. Check all stabilizer links on them each (for too much wear and replace). Installation in order of removal to ensure that all fasteners are set to the correct torque.

Genuine Mercedes-Benz Sway Bar Bushing

Stabilizer Sway Bar Bushing

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

59 Sway Bar Bushings found

View related parts
Mercedes-Benz Bushings
Part Number: 210-323-14-85
$7.20 MSRP: $10.00
You Save: $2.80 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rubber Mounting; Bushing
Fits the following Mercedes-Benz Models:
- E300 | 1998-1999 | Base | 6 Cyl 3.0 L DIESEL
- E320 | 1998-2002 | Base | 6 Cyl 3.2 L GAS
- E430 | 1999 | Base | 8 Cyl 4.3 L GAS
View More
View related parts
Mercedes-Benz Stabilizer Bar Bushing
Part Number: 203-323-20-85
$7.93 MSRP: $11.00
You Save: $3.07 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rubber Mounting; Bushing
Fits the following Mercedes-Benz Models:
- C230 | 2002-2005 | Kompressor | 4 Cyl 1.8 L GAS, 4 Cyl 2.3 L GAS
- C240 | 2001-2005 | 4Matic, Base | 6 Cyl 2.6 L GAS
- C32 AMG | 2002-2004 | Base | 6 Cyl 3.2 L GAS
- C320 | 2001-2005 | 4Matic, Base | 6 Cyl 3.2 L FLEX, 6 Cyl 3.2 L GAS
- CLK320 | 2003-2005 | Base | 6 Cyl 3.2 L GAS
- CLK350 | 2006-2009 | Base | 6 Cyl 3.5 L GAS
- CLK500 | 2003-2006 | Base | 8 Cyl 5.0 L GAS
- CLK550 | 2007-2009 | Base | 8 Cyl 5.5 L GAS
- CLK63 AMG | 2007-2008 | Base, Black Series | 8 Cyl 6.3 L GAS
View More
View related parts
Mercedes-Benz Stabilizer Bar Bushing
Part Number: 124-323-39-85
$10.49 MSRP: $14.50
You Save: $4.01 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rubber Bearing
Fits the following Mercedes-Benz Models:
- 190E | 1987-1993 | 2.6 | 6 Cyl 2.6 L GAS
View related parts
Mercedes-Benz Stabilizer Bar Bushing
Part Number: 124-326-00-81
$10.25 MSRP: $14.00
You Save: $3.75 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rubber Mounting
Fits the following Mercedes-Benz Models:
- CLK320 | 1999-2003 | Base | 6 Cyl 3.2 L GAS
View related parts
Mercedes-Benz Stabilizer Bar Bushing
Part Number: 203-323-25-85
$7.08 MSRP: $9.75
You Save: $2.67 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rubber Mounting; Bushing
Fits the following Mercedes-Benz Models:
- C32 AMG | 2003-2004 | Base | 6 Cyl 3.2 L GAS
- C55 AMG | 2005-2006 | Base | 8 Cyl 5.5 L GAS
- CLK55 AMG | 2003-2006 | Base | 8 Cyl 5.5 L GAS
View More
View related parts
Mercedes-Benz Stabilizer Bar Bushing
Part Number: 203-326-02-81
$7.08 MSRP: $9.75
You Save: $2.67 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rubber Mounting; Bushing, Stabilizer Bar Bushing
Fits the following Mercedes-Benz Models:
- CLK320 | 2005 | Base | 6 Cyl 3.2 L GAS
- CLK350 | 2009 | Base | 6 Cyl 3.5 L GAS
- CLK500 | 2003-2006 | Base | 8 Cyl 5.0 L GAS
- CLK55 AMG | 2004-2006 | Base | 8 Cyl 5.5 L GAS
- CLK550 | 2009 | Base | 8 Cyl 5.5 L GAS
View More
View related parts
Mercedes-Benz Stabilizer Bar Bushing
Part Number: 203-326-12-81
$9.88 MSRP: $13.50
You Save: $3.62 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rubber Mounting; Bushing
Fits the following Mercedes-Benz Models:
- CLK63 AMG | 2007-2008 | Base, Black Series | 8 Cyl 6.3 L GAS
View related parts
Mercedes-Benz Stabilizer Bar Bushing
Part Number: 124-323-38-85
$7.44 MSRP: $10.50
You Save: $3.06 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rubber Bearing
- Replaces: 124-323-18-85
Fits the following Mercedes-Benz Models:
- 190E | 1987-1993 | 2.6 | 6 Cyl 2.6 L GAS
View related parts
Mercedes-Benz Stabilizer Bar Bushing
Part Number: 124-326-05-81
$7.32 MSRP: $10.00
You Save: $2.68 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Mount, Torsion Bar, Vlrub
Fits the following Mercedes-Benz Models:
- 300E | 1990-1993 | 2.6, 2.8, 4Matic, Base | 6 Cyl 2.6 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.2 L GAS
- 300TD | 1987 | Base | 6 Cyl 3.0 L DIESEL
- 300TE | 1988-1993 | 4Matic, Base | 6 Cyl 3.0 L GAS, 6 Cyl 3.2 L GAS
- E300 | 1995 | Base | 6 Cyl 3.0 L DIESEL
- E320 | 1994-1995 | Base | 6 Cyl 3.2 L GAS
View More
View related parts
Mercedes-Benz Stabilizer Bar Bushing
Part Number: 203-326-08-81
$7.20 MSRP: $10.00
You Save: $2.80 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rubber Mounting; Bushing
- Replaces: 203-326-09-81
Fits the following Mercedes-Benz Models:
- CLK350 | 2006 | Base | 6 Cyl 3.5 L GAS
- CLK55 AMG | 2003-2006 | Base | 8 Cyl 5.5 L GAS
- CLK63 AMG | 2008 | Base, Black Series | 8 Cyl 6.3 L GAS
View More
View related parts
Mercedes-Benz Stabilizer Bar Bushing
Part Number: 203-326-00-81
$9.39 MSRP: $13.00
You Save: $3.61 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rubber Mounting
Fits the following Mercedes-Benz Models:
- CLK550 | 2007-2008 | Base | 8 Cyl 5.5 L GAS
View related parts
Mercedes-Benz Stabilizer Bar Inner Bushing
Part Number: 129-323-01-85
$8.05 MSRP: $11.00
You Save: $2.95 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rubber Bearing
- Replaces: 129-323-00-85
Fits the following Mercedes-Benz Models:
- 300SL | 1990-1993 | Base | 6 Cyl 3.0 L GAS
- 500SL | 1990-1993 | Base | 8 Cyl 5.0 L GAS
- 600SL | 1993 | Base | 12 Cyl 6.0 L GAS
- E300 | 1998-1999 | Base | 6 Cyl 3.0 L DIESEL
- E320 | 1998-2003 | 4Matic, Base | 6 Cyl 3.2 L GAS
- E430 | 1998-2002 | 4Matic, Base | 8 Cyl 4.3 L GAS
- E55 AMG | 1999-2002 | Base | 8 Cyl 5.5 L GAS
- G550 | 2016-2018 | Base | 8 Cyl 4.0 L GAS
- G63 AMG | 2016-2018 | Base | 8 Cyl 5.5 L GAS
- G65 AMG | 2016-2018 | Base | 12 Cyl 6.0 L GAS
View More
View related parts
Mercedes-Benz Stabilizer Bar Insulator
Part Number: 203-326-01-81
$9.15 MSRP: $12.50
You Save: $3.35 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rubber Mounting
Fits the following Mercedes-Benz Models:
- C230 | 2003-2007 | Kompressor, Sport | 4 Cyl 1.8 L GAS, 6 Cyl 2.5 L FLEX, 6 Cyl 2.5 L GAS
- C240 | 2001-2005 | 4Matic, Base | 6 Cyl 2.6 L GAS
- C280 | 2006-2007 | 4Matic, Luxury | 6 Cyl 3.0 L GAS
- C32 AMG | 2002-2004 | Base | 6 Cyl 3.2 L GAS
- C320 | 2001-2005 | 4Matic, Base | 6 Cyl 3.2 L FLEX, 6 Cyl 3.2 L GAS
- C350 | 2006-2007 | 4Matic, Luxury, Sport | 6 Cyl 3.5 L GAS
- C55 AMG | 2005-2006 | Base | 8 Cyl 5.5 L GAS
- CLK320 | 2003-2005 | Base | 6 Cyl 3.2 L GAS
- CLK350 | 2006-2008 | Base | 6 Cyl 3.5 L GAS
- CLK500 | 2003-2006 | Base | 8 Cyl 5.0 L GAS
View More
View related parts
Mercedes-Benz Stabilizer Bar Bushing
Part Number: 210-326-04-81
$10.74 MSRP: $15.00
You Save: $4.26 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rubber Mounting; Bushing
Fits the following Mercedes-Benz Models:
- SLK55 AMG | 2005-2010 | Base | 8 Cyl 5.5 L GAS
View related parts
Mercedes-Benz Bushings
Part Number: 463-323-04-85
$11.90 MSRP: $16.50
You Save: $4.60 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rubber Mounting; Bushing
Fits the following Mercedes-Benz Models:
- G500 | 2006-2008 | Base | 8 Cyl 5.0 L GAS
- G55 AMG | 2006-2011 | Base | 8 Cyl 5.5 L GAS
- G550 | 2009-2018 | Base | 8 Cyl 4.0 L GAS, 8 Cyl 5.5 L GAS
- G63 AMG | 2013-2018 | Base | 8 Cyl 5.5 L GAS
- G65 AMG | 2016-2018 | Base | 12 Cyl 6.0 L GAS
View More
View related parts
Mercedes-Benz Stabilizer Bar Insulator
Part Number: 164-323-11-85
$24.40 MSRP: $33.50
You Save: $9.10 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rubber Mounting; Bushing, Stabilizer Bar Bushing
Fits the following Mercedes-Benz Models:
- GL320 | 2007-2009 | Bluetec 4Matic, CDI | 6 Cyl 3.0 L DIESEL
- GL350 | 2010-2012 | Bluetec 4Matic | 6 Cyl 3.0 L DIESEL
- GL450 | 2007-2012 | Base | 8 Cyl 4.7 L GAS
- GL550 | 2008-2012 | Base | 8 Cyl 5.5 L GAS
- ML320 | 2007-2009 | Bluetec 4Matic, CDI | 6 Cyl 3.0 L DIESEL
- ML350 | 2006-2011 | 4Matic, Base, Bluetec 4Matic | 6 Cyl 3.0 L DIESEL, 6 Cyl 3.5 L GAS
- ML450 | 2010-2011 | Hybrid 4Matic | 6 Cyl 3.5 L FULL HYBRID EV-GAS (FHEV)
- ML500 | 2006-2007 | Base | 8 Cyl 5.0 L GAS
- ML550 | 2008-2011 | Base | 8 Cyl 5.5 L GAS
- ML63 AMG | 2007-2011 | Base | 8 Cyl 6.3 L GAS
View More
View related parts
Mercedes-Benz Stabilizer Bar Insulator
Part Number: 251-323-08-85
$22.57 MSRP: $31.00
You Save: $8.43 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rubber Mounting
Fits the following Mercedes-Benz Models:
- R63 AMG | 2007 | Base | 8 Cyl 6.3 L GAS
View related parts
Mercedes-Benz Stabilizer Bar Bushing
Part Number: 201-326-14-81
$3.05 MSRP: $4.20
You Save: $1.15 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Mount, Torsion Bar, Vlrub; Bushing, Stabilizer Bar Bushing
Fits the following Mercedes-Benz Models:
- 300SL | 1990-1993 | Base | 6 Cyl 3.0 L GAS
- 500SL | 1990-1993 | Base | 8 Cyl 5.0 L GAS
- 600SL | 1993 | Base | 12 Cyl 6.0 L GAS
- C230 | 1999-2000 | Kompressor | 4 Cyl 2.3 L GAS
- C280 | 1994-1997 | Base | 6 Cyl 2.8 L GAS
- CLK320 | 1998-2003 | Base | 6 Cyl 3.2 L GAS
- CLK430 | 1999-2003 | Base | 8 Cyl 4.3 L GAS
- CLK55 AMG | 2001-2002 | Base | 8 Cyl 5.5 L GAS
- SL320 | 1994-1997 | Base | 6 Cyl 3.2 L GAS
- SL500 | 1994-2002 | Base | 8 Cyl 5.0 L GAS
View More
View related parts
Mercedes-Benz Stabilizer Bar Bushing
Part Number: 124-323-56-85
Product Specifications
- Other Name: Rubber Bearing; Bushing
Fits the following Mercedes-Benz Models:
- 260E | 1987-1989 | Base | 6 Cyl 2.6 L GAS
- 300CE | 1988-1993 | Base | 6 Cyl 3.0 L GAS, 6 Cyl 3.2 L GAS
- 300D | 1990-1993, 1987 | 2.5, Base | 5 Cyl 2.5 L DIESEL, 6 Cyl 3.0 L DIESEL
- 300E | 1986-1993 | 2.6, 2.8, 4Matic, Base | 6 Cyl 2.6 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.2 L GAS
- 400E | 1992-1993 | Base | 8 Cyl 4.2 L GAS
- 500E | 1992-1993 | Base | 8 Cyl 5.0 L GAS
- E300 | 1995 | Base | 6 Cyl 3.0 L DIESEL
- E320 | 1994-1995 | Base | 6 Cyl 3.2 L GAS
- E420 | 1994-1995 | Base | 8 Cyl 4.2 L GAS
- E500 | 1994 | Base | 8 Cyl 5.0 L GAS
View More
View related parts
Mercedes-Benz Stabilizer Bar Rubber Mount
Part Number: 210-323-15-85
$10.98 MSRP: $15.00
You Save: $4.02 (27%)
Product Specifications
- Other Name: Rubber Mounting; Bushing
Fits the following Mercedes-Benz Models:
- E300 | 1998-1999 | Base | 6 Cyl 3.0 L DIESEL
- E320 | 1998-2003 | 4Matic, Base | 6 Cyl 3.2 L GAS
- E430 | 1998-2002 | 4Matic, Base | 8 Cyl 4.3 L GAS
- E55 AMG | 1999-2002 | Base | 8 Cyl 5.5 L GAS
View More

| Page 1 of 3 |Next >

1-20 of 59 Results

Mercedes-Benz Sway Bar Bushing

Mercedes-Benz Sway Bar Bushing secures the stabilizer bar to the chassis which helps reduce body roll so every turn is confident and controlled, as well as its durable rubber sleeve which filters out vibration for a smoother ride. Founded in 1926 from a union of companies led by Karl Benz, Mercedes-Benz has expanded from elegant sedans to all types of cars, trucks, and buses, all of which have been known for their refined styling and advanced technology. The brand pushes digital boundaries with MBUX, a voice guided infotainment system that learns habits of the driver, and it recently announced MB.OS, a dedicated platform that merges battery management, driver assist, artificial intelligence, and entertainment into one seamless hub. Energy recovery systems in its electric and hybrid lineup reflect a commitment to sustainability while retaining the luxury feel teens and adults alike adore. Complementing these innovations, the Sway Bar Bushing slips around the anti roll bar on front or rear axles and grips firmly once bolted to the frame. By allowing just the right amount of flex, this keeps a balance between comfortable and sharp handling, as well as helping to dampen clunks over rough pavement and protecting against uneven tire wear. When the part remains healthy, steering remains quick and predictable, maintaining the signature composure that is held throughout the entire vehicle family and ensuring long lasting confidence on city streets and winding roads alike.

Genuine parts are built to last. These components go through tough factory testing, so you can trust they will hold up over time. At MBPartsGiant.com, finding Mercedes-Benz Sway Bar Bushing is quick and simple. We keep a massive inventory in stock with low prices that are hard to beat. Just order online to get a real manufacturer's warranty with every single part. Returns won't be a headache either, thanks to our no-hassle policy. If you are in a rush, we provide expedited shipping to get your vehicle back on the road. Don't wait. Finish your repairs today and keep your Mercedes-Benz running like new. Explore the catalog now.

Mercedes-Benz Sway Bar Bushing Parts and Q&A

Stabilizer Bar Bushing
203-323-20-85
Q: How to remove and inspect the front Sway Bar, Sway Bar Bushing and Sway Bar Link on Mercedes-Benz C230?
A:
Lift the front of the car and rest it low on jackstands, then take off the front wheels, but set the jackstands up against the frame and not on anything in the suspension. Take out a vehicle undercarriage splash screen. Then unscrew the lower nut in each stabilizer bar link and also all the links of the bar, checking the little boots to see whether they are damaged or worn, and replacing them, as needed; the links may be completely removed by parting them out of the strut assemblies. Remove the fasteners of the stabilizer bar bracket along with the bracket, taking care with models with bi-xenon headlamps that there is a sensor and linkage installed to the stabilizer bar; make a note of where the sensor linkage is before carefully removing it. Removing the stabilizer bar and the rubber bushings of the stabilizer bar of rear-wheel drive models. Removal of the stabilizer bar in 4MATIC floor processes necessitize lowering the sub frame but stabilising the engine weight at the top, making the work demanding in terms of procedures and safety measures; it is always recommended that when the vehicle is suspected to be damaged to be inspected at a qualified body repair business. Wipe down the entire stabilizer bar that touches the bushings and check all the bushings, replacing any broken, tainted, or damaged strands of rubber. Check every stabilizer link due to excessive wear, replace where required then re-fit in reverse order in which they were removed and make sure that all sources are tightened with the appropriate torque.
Stabilizer Bar Bushing
203-323-21-85
Q: How to properly remove and replace the rear Sway Bar, Sway Bar Bushing and Sway Bar Link on Mercedes-Benz C280?
A:
Lift up the back of the vehicle and then place it safely on jackstands; remember that the jacks should be under the frame and not under any of the suspension components. Take the bottom nut off each stabilizer bar join and remove the links off the bar, examining the little boots to see if there is any damage or wear and a replacement is may be required. Unscrew the stabilizer bar bracket connectors and take the brackets off (removing the stabilizer bar itself and rubber bushings). Clean the point of contact at the stabilizer bar and check all bushings to ensure wear and both internal and external damage, and change any broken, shredded, or worn out pieces of rubber. Check all stabilizer links on them each (for too much wear and replace). Installation in order of removal to ensure that all fasteners are set to the correct torque.

Related Mercedes-Benz Parts

Browse by Model