What precautions should be taken before starting work on brake hoses on Mercedes-Benz 190E?

Before going to work, you should reduce the loss of fluids when filling up any pipe or hose by first sealing the master cylinder reservoir cover with polythene. You can also use flexible hoses and seal them using a brake hose clamp, or seal metal brake pipe union with a brake pipe union plug or brake pipe union cap by moving in order to avoid dirt getting into the system. Any union should have a wad of rag put below it to absorb spilled fluid. To loosen that flexible hose, loosen the brake pipe union nut and then remove the spring clip attached to the hose. A brake pipe spanner of correct size is best used to unscrew the union nuts, although an open-ended spanner that fits closely can be used carefully to avoid rounding off the nuts. It can be required only when the stubborn nuts show themselves; then a self-locking wrench can be required; the damaged nuts and pipe should then be replaced at reassembly. Before removing the connections, change of union and surrounding area should always be cleaned, and connection at the multiple ends should be noted: to prevent any dirt entering the hydraulic system marked notes must be made of each connection. Union nut bare brake pipes perforated with union end flares (brake pipes may also use ANOE flares) and kits consisting of bare brake pipes with flares and nuts are available at dealers or assemblies at accessory shops (for details, see below). When relevant, refitting also implies that union nuts should not be over tightened with pipes and hoses in place where they belong. Installation Once installed, take away the polythene sheet in the reservoir, bleed the hydraulic system, rinse off any spilled fluid and check the leaks. Lastly, motor braking system has to be thoroughly tested before the vehicle is reintroduced into the service of the people.

How to inspect and replace brake hoses and lines on Mercedes-Benz C230?

About every six months, with the vehicle raised and securely supported on jackstands, inspect the rubber hoses connecting the steel brake lines to the front and rear brake assemblies for cracks, chafing, leaks, blisters, and other damage, as these are crucial components of the brake system. Use a light and mirror for a thorough check, and replace any damaged hose with a new one. For front brake hose replacement, loosen the wheel bolts, raise the vehicle, and remove the wheel. Note how the small tabs of the hose fitting sit in the frame bracket to prevent rotation. Support the hose fitting with an open-end wrench and unscrew the brake line fitting from the hose using a flarenut wrench to avoid rounding off the corners. At the caliper end, separate the hose fitting from the caliper with a flare nut wrench. Remove the grommet from the bracket at the lower end of the strut and pull the hose through the bracket. To install the new hose, place the grommet on it, thread it through the strut bracket, connect the hose fitting to the caliper, and tighten it. Ensure the hose isn't twisted when placing the fitting into the frame bracket, then connect the line fitting to the hose fitting and tighten securely. After bleeding the caliper, install the wheel and bolts, lower the vehicle, and tighten the bolts to the specified torque. For the rear brake hose, which has a fitting and bracket fastened to the rear frame, follow the same replacement steps as for the front. When replacing metal brake lines, use genuine steel brake lines and avoid copper tubing. Prefabricated brake lines with flared tube ends and installed fittings are available at auto parts stores. Ensure the new line is securely supported in brackets and has adequate clearance from moving or hot components. After installation, check the master cylinder fluid level, add fluid if necessary, bleed the brake system, and test the brakes carefully before driving.

Genuine Mercedes-Benz Brake Hose

Brake Line

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

107 Brake Hoses found

View related parts
Mercedes-Benz Brake Hose
Part Number: 204-420-09-48-64
$18.30 MSRP: $25.00
You Save: $6.70 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Flex Hose
- Replaces: 204-420-09-48, 204-420-04-48
Fits the following Mercedes-Benz Models:
- C250 | 2012-2015 | Base, Luxury, Sport | 4 Cyl 1.8 L GAS
- C300 | 2008-2014 | 4Matic, 4Matic Luxury, 4Matic Sport, Luxury, Sport | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS
- C350 | 2008-2015 | 4Matic, Base, Sport | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS
- C63 AMG | 2008-2015 | Base, Black Series | 8 Cyl 6.3 L GAS
- E350 | 2012-2014 | 4Matic, Base | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS
- E400 | 2015-2017 | 4Matic, Base | 6 Cyl 3.0 L GAS
- E550 | 2014-2017 | Base | 8 Cyl 4.7 L GAS
View More
View related parts
Mercedes-Benz Brake Hose
Part Number: 167-420-20-00
$28.67 MSRP: $39.50
You Save: $10.83 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Flex Hose
- Replaced by: 167-420-20-00-64
Fits the following Mercedes-Benz Models:
- GLE350 | 2020-2023 | 4Matic, Base | 4 Cyl 2.0 L GAS
- GLE450 | 2020-2022 | 4Matic | 6 Cyl 3.0 L MILD HYBRID EV-GAS (MHEV)
- GLE53 AMG | 2021-2024 | 4Matic, 4Matic+ | 6 Cyl 3.0 L MILD HYBRID EV-GAS (MHEV)
- GLE580 | 2020-2023 | 4Matic | 8 Cyl 4.0 L MILD HYBRID EV-GAS (MHEV)
- GLE63 AMG S | 2022 | 4Matic | 8 Cyl 4.0 L MILD HYBRID EV-GAS (MHEV)
- GLS450 | 2020-2023 | 4Matic | 6 Cyl 3.0 L MILD HYBRID EV-GAS (MHEV)
- GLS580 | 2020-2023 | 4Matic | 8 Cyl 4.0 L MILD HYBRID EV-GAS (MHEV)
View More
View related parts
Mercedes-Benz Brake Hose
Part Number: 190-420-11-00-65
$43.20 MSRP: $60.00
You Save: $16.80 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Flex Hose
- Replaces: 190-420-11-00
Fits the following Mercedes-Benz Models:
- AMG GT Black Series | 2021 | Base | 8 Cyl 4.0 L GAS
- AMG GT C | 2018-2021 | Base | 8 Cyl 4.0 L GAS
- AMG GT R | 2018-2020 | Base | 8 Cyl 4.0 L GAS
- AMG GT R Pro | 2020 | Base | 8 Cyl 4.0 L GAS
View More
View related parts
Mercedes-Benz Brake Hose
Part Number: 251-420-06-48-64
$21.96 MSRP: $30.00
You Save: $8.04 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Flex Hose
- Replaces: 251-420-04-48, 251-420-06-48
Fits the following Mercedes-Benz Models:
- R320 | 2007-2009 | Bluetec, CDI | 6 Cyl 3.0 L DIESEL
- R350 | 2006-2012 | 4Matic, Base, Bluetec 4Matic | 6 Cyl 3.0 L DIESEL, 6 Cyl 3.5 L GAS
- R500 | 2006-2007 | Base | 8 Cyl 5.0 L GAS
- R63 AMG | 2007 | Base | 8 Cyl 6.3 L GAS
View More
View related parts
Mercedes-Benz Brake Hose
Part Number: 205-420-02-48
$17.08 MSRP: $23.50
You Save: $6.42 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Flex Hose
Fits the following Mercedes-Benz Models:
- C300 | 2015-2023 | 4Matic, Base | 4 Cyl 2.0 L GAS, 4 Cyl 2.0 L MILD HYBRID EV-GAS (MHEV)
- CLS450 | 2019-2023 | 4Matic, Base | 6 Cyl 3.0 L MILD HYBRID EV-GAS (MHEV)
- CLS53 AMG | 2019-2021 | 4Matic | 6 Cyl 3.0 L MILD HYBRID EV-GAS (MHEV)
- E300 | 2017-2019 | 4Matic, Base | 4 Cyl 2.0 L GAS
- E350 | 2020-2023 | 4Matic, Base | 4 Cyl 2.0 L GAS
- E400 | 2017-2018 | 4Matic, Base | 6 Cyl 3.0 L GAS
- E43 AMG | 2017-2018 | 4Matic | 6 Cyl 3.0 L GAS
- E450 | 2019-2023 | 4Matic, Base | 6 Cyl 3.0 L GAS, 6 Cyl 3.0 L MILD HYBRID EV-GAS (MHEV)
- E53 AMG | 2019-2020 | 4Matic | 6 Cyl 3.0 L MILD HYBRID EV-GAS (MHEV)
- E63 AMG S | 2018-2020 | 4Matic | 8 Cyl 4.0 L GAS
View More
View related parts
Mercedes-Benz Brake Hose
Part Number: 164-420-05-48-64
$20.13 MSRP: $27.50
You Save: $7.37 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Flex Hose
- Replaces: 164-420-05-48, 164-420-02-48
Fits the following Mercedes-Benz Models:
- GL320 | 2007-2009 | Bluetec 4Matic, CDI | 6 Cyl 3.0 L DIESEL
- GL350 | 2010-2012 | Bluetec 4Matic | 6 Cyl 3.0 L DIESEL
- GL450 | 2007-2012 | Base | 8 Cyl 4.7 L GAS
- GL550 | 2008-2012 | Base | 8 Cyl 5.5 L GAS
- ML320 | 2007-2009 | Bluetec 4Matic, CDI | 6 Cyl 3.0 L DIESEL
- ML350 | 2006-2011 | 4Matic, Base, Bluetec 4Matic | 6 Cyl 3.0 L DIESEL, 6 Cyl 3.5 L GAS
- ML450 | 2010-2011 | Hybrid 4Matic | 6 Cyl 3.5 L FULL HYBRID EV-GAS (FHEV)
- ML500 | 2006-2007 | Base | 8 Cyl 5.0 L GAS
- ML550 | 2008-2011 | Base | 8 Cyl 5.5 L GAS
- ML63 AMG | 2007-2011 | Base | 8 Cyl 6.3 L GAS
View More
View related parts
Mercedes-Benz Brake Hose
Part Number: 172-428-01-35
$15.86 MSRP: $22.00
You Save: $6.14 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Flex Hose
Fits the following Mercedes-Benz Models:
- SLC43 AMG | 2017-2020 | Base, Final Edition | 6 Cyl 3.0 L GAS
- SLK55 AMG | 2012-2016 | Base | 8 Cyl 5.5 L GAS
View related parts
Mercedes-Benz Brake Hose
Part Number: 206-420-16-00
$37.80 MSRP: $53.00
You Save: $15.20 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Flex Hose
- Replaced by: 206-420-44-00
Fits the following Mercedes-Benz Models:
- C300 | 2022-2023 | 4Matic, Base | 4 Cyl 2.0 L GAS, 4 Cyl 2.0 L MILD HYBRID EV-GAS (MHEV)
View related parts
Mercedes-Benz Brake Hose
Part Number: 254-420-06-00
$20.74 MSRP: $28.50
You Save: $7.76 (28%)
Ships in 1-2 Business Days
ADD TO CART
Fits the following Mercedes-Benz Models:
- GLC300 | 2023 | 4Matic, Base | 4 Cyl 2.0 L GAS, 4 Cyl 2.0 L MILD HYBRID EV-GAS (MHEV)
View related parts
Mercedes-Benz Brake Hose
Part Number: 254-420-15-00
$23.18 MSRP: $32.00
You Save: $8.82 (28%)
Ships in 1-2 Business Days
ADD TO CART
Fits the following Mercedes-Benz Models:
- GLC300 | 2023 | 4Matic, Base | 4 Cyl 2.0 L GAS, 4 Cyl 2.0 L MILD HYBRID EV-GAS (MHEV)
View related parts
Mercedes-Benz Brake Hose
Part Number: 123-420-65-28-64
$23.79 MSRP: $32.50
You Save: $8.71 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Line; Brake Hose
- Replaces: 202-420-39-28, 124-420-41-29, 129-320-29-72, 123-420-65-28
Fits the following Mercedes-Benz Models:
- G500 | 2004-2005 | Base | 8 Cyl 5.0 L GAS
- G55 AMG | 2004-2005 | Base | 8 Cyl 5.5 L GAS
View related parts
Mercedes-Benz Brake Hose
Part Number: 126-428-03-35-64
$18.30 MSRP: $25.00
You Save: $6.70 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Flex Hose, Hose
- Replaces: 123-428-01-35, 126-428-03-35
Fits the following Mercedes-Benz Models:
- 190D | 1984-1989 | 2.2, 2.5, 2.5 Turbo | 4 Cyl 2.2 L DIESEL, 5 Cyl 2.5 L DIESEL
- 190E | 1984-1993 | 2.3, 2.3-16, 2.6 | 4 Cyl 2.3 L GAS, 6 Cyl 2.6 L GAS
- 260E | 1987-1989 | Base | 6 Cyl 2.6 L GAS
- 300CE | 1988-1993 | Base | 6 Cyl 3.0 L GAS, 6 Cyl 3.2 L GAS
- 300D | 1990-1993, 1987 | 2.5, Base | 5 Cyl 2.5 L DIESEL, 6 Cyl 3.0 L DIESEL
- 300E | 1986-1993 | 2.6, 2.8, 4Matic, Base | 6 Cyl 2.6 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.2 L GAS
- 300SD | 1992-1993, 1984-1985 | Base | 5 Cyl 3.0 L DIESEL, 6 Cyl 3.4 L DIESEL
- 300SE | 1988-1993 | Base | 6 Cyl 3.0 L GAS, 6 Cyl 3.2 L GAS
- 300SEL | 1988-1991 | Base | 6 Cyl 3.0 L GAS
- 300SL | 1990-1993 | Base | 6 Cyl 3.0 L GAS
View More
View related parts
Mercedes-Benz Brake Hose
Part Number: 206-420-40-00
$22.57 MSRP: $31.00
You Save: $8.43 (28%)
Ships in 1-2 Business Days
ADD TO CART
Fits the following Mercedes-Benz Models:
- C43 AMG | 2023-2024 | 4Matic | 4 Cyl 2.0 L MILD HYBRID EV-GAS (MHEV), 6 Cyl 3.0 L GAS
View related parts
Mercedes-Benz Brake Hose
Part Number: 206-420-43-00
$23.79 MSRP: $32.50
You Save: $8.71 (27%)
Ships in 1-2 Business Days
ADD TO CART
Fits the following Mercedes-Benz Models:
- C43 AMG | 2023-2024 | 4Matic | 4 Cyl 2.0 L MILD HYBRID EV-GAS (MHEV), 6 Cyl 3.0 L GAS
View related parts
Mercedes-Benz Brake Hose
Part Number: 123-420-50-28-64
$21.96 MSRP: $30.00
You Save: $8.04 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Line; Brake Hose
- Replaces: 123-420-50-28
Fits the following Mercedes-Benz Models:
- G500 | 2004-2005 | Base | 8 Cyl 5.0 L GAS
- G55 AMG | 2004-2005 | Base | 8 Cyl 5.5 L GAS
View related parts
Mercedes-Benz Brake Hose
Part Number: 167-420-76-00
$23.18 MSRP: $32.00
You Save: $8.82 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Flex Hose
- Replaced by: 167-420-76-00-64
Fits the following Mercedes-Benz Models:
- GLE350 | 2020-2023 | 4Matic, Base | 4 Cyl 2.0 L GAS
View related parts
Mercedes-Benz Brake Hose
Part Number: 204-420-00-48-64
$19.52 MSRP: $27.00
You Save: $7.48 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Flex Hose
- Replaces: 230-420-01-48, 204-420-00-48
Fits the following Mercedes-Benz Models:
- SL500 | 2003-2006 | Base | 8 Cyl 5.0 L GAS
- SL55 AMG | 2003-2008 | Base, Kompressor | 8 Cyl 5.5 L GAS
- SL550 | 2011-2012, 2007-2009 | Base | 8 Cyl 5.5 L GAS
- SL600 | 2004-2009 | Base | 12 Cyl 5.5 L GAS
- SL63 AMG | 2011-2012, 2009 | Base | 8 Cyl 6.3 L GAS
- SL65 AMG | 2011, 2005-2009 | Base, Black Series | 12 Cyl 6.0 L GAS
View More
View related parts
Mercedes-Benz Brake Hose
Part Number: 204-420-10-48-64
$21.35 MSRP: $29.50
You Save: $8.15 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Flex Hose
- Replaces: 204-420-10-48, 204-420-03-48, 204-420-08-48
Fits the following Mercedes-Benz Models:
- C250 | 2012-2015 | Base, Luxury, Sport | 4 Cyl 1.8 L GAS
- C300 | 2008-2014 | 4Matic, 4Matic Luxury, 4Matic Sport, Luxury, Sport | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS
- C350 | 2008-2015 | 4Matic, Base, Sport | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS
- C63 AMG | 2008-2015 | Base, Black Series | 8 Cyl 6.3 L GAS
- E350 | 2010-2014 | 4Matic, Base | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS
- E400 | 2015-2017 | 4Matic, Base | 6 Cyl 3.0 L GAS
- E550 | 2010-2017 | Base | 8 Cyl 4.7 L GAS, 8 Cyl 5.5 L GAS
- GLK250 | 2013-2015 | Bluetec 4Matic | 4 Cyl 2.1 L DIESEL
- GLK350 | 2010-2015 | 4Matic, Base | 6 Cyl 3.5 L GAS
View More
View related parts
Mercedes-Benz Brake Hose
Part Number: 206-420-28-00
$26.23 MSRP: $36.00
You Save: $9.77 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Flex Hose
Fits the following Mercedes-Benz Models:
- C300 | 2022-2024 | 4Matic, Base | 4 Cyl 2.0 L GAS, 4 Cyl 2.0 L MILD HYBRID EV-GAS (MHEV)
View related parts
Mercedes-Benz Brake Hose
Part Number: 251-420-05-48-64
$18.30 MSRP: $25.00
You Save: $6.70 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Flex Hose
- Replaces: 251-420-03-48, 251-420-05-48
Fits the following Mercedes-Benz Models:
- R320 | 2007-2009 | Bluetec, CDI | 6 Cyl 3.0 L DIESEL
- R350 | 2006-2012 | 4Matic, Base, Bluetec 4Matic | 6 Cyl 3.0 L DIESEL, 6 Cyl 3.5 L GAS
- R500 | 2006-2007 | Base | 8 Cyl 5.0 L GAS
- R63 AMG | 2007 | Base | 8 Cyl 6.3 L GAS
View More

| Page 1 of 6 |Next >

1-20 of 107 Results

Mercedes-Benz Brake Hose

Every part of the automobile matters, and their maintenance is crucial for the health of your vehicle. Moreover, a faulted Mercedes-Benz Brake Hose can impact its functionality as well as lead to system-wide problems that may endanger safety. Thus, it is imperative that one repairs or replaces failing parts for better driving experiences. Why go for OEM Mercedes-Benz Brake Hoses? Because they are the optimal solutions, fit your vehicle perfectly, and are easy to install. Therefore, these factors help maintain the dependability and performance of your vehicle. At MBPartsGiant.com, you may find all the required genuine parts for your Mercedes-Benz. They are delivered from authorized Mercedes-Benz dealers directly via an uncomplicated online catalog. We guarantee promptness, reliability, and cheap sales on the Mercedes-Benz Brake Hose, and we always provide you with the right part at any time. Depend on our genuine Mercedes-Benz Brake Hoses to keep your vehicle running smoothly.

Mercedes-Benz Brake Hose Parts and Q&A

Brake Hose
126-428-03-35-64
Q: What precautions should be taken before starting work on brake hoses on Mercedes-Benz 190E?
A:
Before going to work, you should reduce the loss of fluids when filling up any pipe or hose by first sealing the master cylinder reservoir cover with polythene. You can also use flexible hoses and seal them using a brake hose clamp, or seal metal brake pipe union with a brake pipe union plug or brake pipe union cap by moving in order to avoid dirt getting into the system. Any union should have a wad of rag put below it to absorb spilled fluid. To loosen that flexible hose, loosen the brake pipe union nut and then remove the spring clip attached to the hose. A brake pipe spanner of correct size is best used to unscrew the union nuts, although an open-ended spanner that fits closely can be used carefully to avoid rounding off the nuts. It can be required only when the stubborn nuts show themselves; then a self-locking wrench can be required; the damaged nuts and pipe should then be replaced at reassembly. Before removing the connections, change of union and surrounding area should always be cleaned, and connection at the multiple ends should be noted: to prevent any dirt entering the hydraulic system marked notes must be made of each connection. Union nut bare brake pipes perforated with union end flares (brake pipes may also use ANOE flares) and kits consisting of bare brake pipes with flares and nuts are available at dealers or assemblies at accessory shops (for details, see below). When relevant, refitting also implies that union nuts should not be over tightened with pipes and hoses in place where they belong. Installation Once installed, take away the polythene sheet in the reservoir, bleed the hydraulic system, rinse off any spilled fluid and check the leaks. Lastly, motor braking system has to be thoroughly tested before the vehicle is reintroduced into the service of the people.
Brake Hose
171-428-00-35-64
Q: How to inspect and replace brake hoses and lines on Mercedes-Benz C230?
A:
About every six months, with the vehicle raised and securely supported on jackstands, inspect the rubber hoses connecting the steel brake lines to the front and rear brake assemblies for cracks, chafing, leaks, blisters, and other damage, as these are crucial components of the brake system. Use a light and mirror for a thorough check, and replace any damaged hose with a new one. For front brake hose replacement, loosen the wheel bolts, raise the vehicle, and remove the wheel. Note how the small tabs of the hose fitting sit in the frame bracket to prevent rotation. Support the hose fitting with an open-end wrench and unscrew the brake line fitting from the hose using a flarenut wrench to avoid rounding off the corners. At the caliper end, separate the hose fitting from the caliper with a flare nut wrench. Remove the grommet from the bracket at the lower end of the strut and pull the hose through the bracket. To install the new hose, place the grommet on it, thread it through the strut bracket, connect the hose fitting to the caliper, and tighten it. Ensure the hose isn't twisted when placing the fitting into the frame bracket, then connect the line fitting to the hose fitting and tighten securely. After bleeding the caliper, install the wheel and bolts, lower the vehicle, and tighten the bolts to the specified torque. For the rear brake hose, which has a fitting and bracket fastened to the rear frame, follow the same replacement steps as for the front. When replacing metal brake lines, use genuine steel brake lines and avoid copper tubing. Prefabricated brake lines with flared tube ends and installed fittings are available at auto parts stores. Ensure the new line is securely supported in brackets and has adequate clearance from moving or hot components. After installation, check the master cylinder fluid level, add fluid if necessary, bleed the brake system, and test the brakes carefully before driving.