How to remove and refit of the Hood Release Cable on Mercedes-Benz 190E?

In order to disassemble the part, release the locking stud on the front panel adjacent to the support strut and remove the cover underneath the lock. In cars which have air conditioning, screw the two screws and position the fan and undo the four clips that are at the top, and push the radiator back to give easy access. The next step is to un-hook the hood release cable at the support bracket and lock lever. Interior Take out the cover of the facia on the left-hand side and screw, and release handle undone and cable disconnected. Pull the rubber grommet at the cable exit point on the bulkhead, and then tie a string to the hood release cable such that it will drag the string through as one draws it out. Draw the cable forward and see the drawstring and when it comes in sight undo it and pull the cable out of the car. When refitting, take the opposite steps of the removal one, and use the string to help the new cable through the bulkhead into the car.

How to remove and install the Hood Latch and Hood Release Cable on Mercedes-Benz C230?

Open the hood to the normal position and draw a mark around both lower latches for alignment before detaching the latch retaining bolts from the radiator support, marking the latch position as you remove the latches; if working on the passenger-side latch, disconnect its electrical connector. Disengage the hood release cable from the latches, then mark the position of the safety catch on the hood and remove its mounting bolts. For the cable, disconnect it from the latch assembly and remove the lower left cover from the instrument panel. In the left rear corner of the engine compartment, detach the fuse and relay box without disconnecting any electrical connectors. Attach a piece of stiff wire to the end of the cable, trace it back to the firewall, and detach all cable retaining clips, noting the two sections with a connector at the left front corner of the engine compartment. In the passenger compartment, disconnect the cable from the hood release lever and pull the old cable into the compartment until the stiff wire is visible. Remove the old grommet from the cable hole in the firewall, ensuring the new cable has a grommet, then detach the old cable from the wire and attach the new one. From the engine compartment side, pull the wire through the cable hole, and during installation, push the grommet into place from the passenger compartment, ensuring it is fully seated in the firewall hole.

Genuine Mercedes-Benz Hood Release Cable

Hood Cable

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

85 Hood Release Cables found

View related parts
Mercedes-Benz Release Cable
Part Number: 251-880-01-59-64
$15.86 MSRP: $22.00
You Save: $6.14 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Engine Hood Cable; Release Cable
- Replaces: 251-880-01-59
Fits the following Mercedes-Benz Models:
- R320 | 2007-2009 | Bluetec, CDI | 6 Cyl 3.0 L DIESEL
- R350 | 2006-2012 | 4Matic, Base, Bluetec 4Matic | 6 Cyl 3.0 L DIESEL, 6 Cyl 3.5 L GAS
- R500 | 2006-2007 | Base | 8 Cyl 5.0 L GAS
- R63 AMG | 2007 | Base | 8 Cyl 6.3 L GAS
View More
View related parts
Mercedes-Benz Release Cable
Part Number: 463-880-54-00
$15.25 MSRP: $21.00
You Save: $5.75 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hood Cable; Release Cable
Fits the following Mercedes-Benz Models:
- G550 | 2019-2023 | Base | 8 Cyl 4.0 L GAS
- G63 AMG | 2019-2023 | Base | 8 Cyl 4.0 L GAS
View related parts
Mercedes-Benz Release Cable
Part Number: 297-880-53-01
$23.18 MSRP: $32.00
You Save: $8.82 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hood Cable; Release Cable
Fits the following Mercedes-Benz Models:
- EQE 350 | 2023-2024 | 4Matic | BATTERY EV (EV/BEV)
- EQE 350+ | 2023-2024 | Base | BATTERY EV (EV/BEV)
- EQE 500 | 2023-2024 | 4Matic | BATTERY EV (EV/BEV)
- EQE AMG | 2023-2024 | 4Matic | BATTERY EV (EV/BEV)
- EQS 450 | 2023 | 4Matic | BATTERY EV (EV/BEV)
- EQS 450+ | 2022-2024 | Base | BATTERY EV (EV/BEV)
- EQS 580 | 2022-2024 | 4Matic | BATTERY EV (EV/BEV)
- EQS AMG | 2022-2024 | 4Matic | BATTERY EV (EV/BEV)
View More
View related parts
Mercedes-Benz Release Cable
Part Number: 297-880-54-01
$34.89 MSRP: $48.00
You Save: $13.11 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hood Cable; Release Cable
- Replaced by: 297-880-54-01-64
Fits the following Mercedes-Benz Models:
- EQS 450 | 2023 | 4Matic | BATTERY EV (EV/BEV)
- EQS 450+ | 2022-2024 | Base | BATTERY EV (EV/BEV)
- EQS 580 | 2022-2024 | 4Matic | BATTERY EV (EV/BEV)
- EQS AMG | 2022-2024 | 4Matic | BATTERY EV (EV/BEV)
View More
View related parts
Mercedes-Benz Release Cable
Part Number: 167-880-10-04
$12.81 MSRP: $17.50
You Save: $4.69 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hood Cable; Release Cable
Fits the following Mercedes-Benz Models:
- GLE350 | 2020-2023 | 4Matic, Base | 4 Cyl 2.0 L GAS
- GLE450 | 2020-2022 | 4Matic | 6 Cyl 3.0 L MILD HYBRID EV-GAS (MHEV)
- GLE53 AMG | 2021-2024 | 4Matic, 4Matic+ | 6 Cyl 3.0 L MILD HYBRID EV-GAS (MHEV)
- GLE580 | 2020-2023 | 4Matic | 8 Cyl 4.0 L MILD HYBRID EV-GAS (MHEV)
- GLE63 AMG S | 2021-2024 | 4Matic, 4Matic+ | 8 Cyl 4.0 L MILD HYBRID EV-GAS (MHEV)
- GLS450 | 2020-2024 | 4Matic | 6 Cyl 3.0 L MILD HYBRID EV-GAS (MHEV)
- GLS580 | 2020-2024 | 4Matic | 8 Cyl 4.0 L MILD HYBRID EV-GAS (MHEV)
- GLS63 AMG | 2021-2024 | Base | 8 Cyl 4.0 L MILD HYBRID EV-GAS (MHEV)
View More
View related parts
Mercedes-Benz Release Cable
Part Number: 463-880-97-00
$14.03 MSRP: $19.50
You Save: $5.47 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hood Cable; Release Cable
Fits the following Mercedes-Benz Models:
- G550 | 2019-2023 | Base | 8 Cyl 4.0 L GAS
- G63 AMG | 2019-2023 | Base | 8 Cyl 4.0 L GAS
View related parts
Mercedes-Benz Release Cable
Part Number: 205-880-04-59-64
$21.96 MSRP: $30.00
You Save: $8.04 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hood Cable; Release Cable
- Replaces: 205-880-04-59
Fits the following Mercedes-Benz Models:
- C63 AMG | 2016-2021 | Base | 8 Cyl 4.0 L GAS
- C63 AMG S | 2015-2021 | Base | 8 Cyl 4.0 L GAS
- E63 AMG S | 2018-2020 | 4Matic | 8 Cyl 4.0 L GAS
View More
View related parts
Mercedes-Benz Release Cable
Part Number: 206-880-15-00-64
$21.96 MSRP: $30.00
You Save: $8.04 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hood Release Cable; Release Cable
- Replaces: 206-880-15-00
Fits the following Mercedes-Benz Models:
- C300 | 2022-2024 | 4Matic, Base | 4 Cyl 2.0 L GAS, 4 Cyl 2.0 L MILD HYBRID EV-GAS (MHEV)
- C43 AMG | 2023-2024 | 4Matic | 4 Cyl 2.0 L MILD HYBRID EV-GAS (MHEV), 6 Cyl 3.0 L GAS
- GLC300 | 2023 | 4Matic, Base | 4 Cyl 2.0 L GAS, 4 Cyl 2.0 L MILD HYBRID EV-GAS (MHEV)
View More
View related parts
Mercedes-Benz Release Cable
Part Number: 209-880-01-59-64
$28.06 MSRP: $38.50
You Save: $10.44 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hood Release Cable; Release Cable
- Replaces: 209-880-01-59
Fits the following Mercedes-Benz Models:
- CLK320 | 2003-2005 | Base | 6 Cyl 3.2 L GAS
- CLK350 | 2006-2009 | Base | 6 Cyl 3.5 L GAS
- CLK500 | 2003-2006 | Base | 8 Cyl 5.0 L GAS
- CLK55 AMG | 2003-2006 | Base | 8 Cyl 5.5 L GAS
- CLK550 | 2007-2009 | Base | 8 Cyl 5.5 L GAS
- CLK63 AMG | 2007-2008 | Base, Black Series | 8 Cyl 6.3 L GAS
View More
View related parts
Mercedes-Benz Release Cable
Part Number: 171-880-00-59-64
$26.23 MSRP: $36.00
You Save: $9.77 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Engine Hood Release Cable; Release Cable
- Replaces: 171-880-00-59
Fits the following Mercedes-Benz Models:
- SLK280 | 2006-2008 | Base | 6 Cyl 3.0 L GAS
- SLK300 | 2009-2011 | Base | 6 Cyl 3.0 L GAS
- SLK350 | 2005-2011 | Base | 6 Cyl 3.5 L GAS
- SLK55 AMG | 2005-2010 | Base | 8 Cyl 5.5 L GAS
View More
View related parts
Mercedes-Benz Release Cable
Part Number: 217-880-85-01-64
$29.89 MSRP: $41.00
You Save: $11.11 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Engine Hood Cable; Release Cable
- Replaces: 217-880-00-59, 217-880-85-01
Fits the following Mercedes-Benz Models:
- S550 | 2015-2017 | 4Matic, Base | 8 Cyl 4.7 L GAS
- S560 | 2018-2021 | 4Matic, Base | 8 Cyl 4.0 L GAS
- S63 AMG | 2015-2021 | 4Matic, Base | 8 Cyl 4.0 L GAS, 8 Cyl 5.5 L GAS
- S65 AMG | 2015-2019 | Base | 12 Cyl 6.0 L GAS
View More
View related parts
Mercedes-Benz Release Cable
Part Number: 203-880-05-59
$23.79 MSRP: $32.50
You Save: $8.71 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Engine Hood Release Cable
- Replaced by: 203-880-05-59-64
- Replaces: 203-880-05-59-64, 203-880-02-59
Fits the following Mercedes-Benz Models:
- C230 | 2002-2007 | Kompressor, Sport | 4 Cyl 1.8 L GAS, 4 Cyl 2.3 L GAS, 6 Cyl 2.5 L FLEX, 6 Cyl 2.5 L GAS
- C240 | 2001-2005 | 4Matic, Base | 6 Cyl 2.6 L GAS
- C280 | 2006-2007 | 4Matic, Luxury | 6 Cyl 3.0 L GAS
- C32 AMG | 2002-2004 | Base | 6 Cyl 3.2 L GAS
- C320 | 2001-2005 | 4Matic, Base | 6 Cyl 3.2 L FLEX, 6 Cyl 3.2 L GAS
- C350 | 2006-2007 | 4Matic, Luxury, Sport | 6 Cyl 3.5 L GAS
- C55 AMG | 2005-2006 | Base | 8 Cyl 5.5 L GAS
View More
View related parts
Mercedes-Benz Release Cable
Part Number: 205-880-57-09-64
$29.89 MSRP: $41.00
You Save: $11.11 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hood Cable; Release Cable
- Replaced by: 205-880-57-09-65
- Replaces: 205-880-57-09, 205-880-01-59-64, 205-880-01-59
Fits the following Mercedes-Benz Models:
- C300 | 2015-2023 | 4Matic, Base | 4 Cyl 2.0 L GAS, 4 Cyl 2.0 L MILD HYBRID EV-GAS (MHEV)
- C350e | 2016-2018 | Base | 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV)
- C400 | 2015 | 4Matic | 6 Cyl 3.0 L GAS
- C43 AMG | 2017-2023 | 4Matic | 4 Cyl 2.0 L MILD HYBRID EV-GAS (MHEV), 6 Cyl 3.0 L GAS
- C450 AMG | 2016 | 4Matic | 6 Cyl 3.0 L GAS
- CLS450 | 2019-2023 | 4Matic, Base | 6 Cyl 3.0 L MILD HYBRID EV-GAS (MHEV)
- CLS53 AMG | 2019-2021 | 4Matic | 6 Cyl 3.0 L MILD HYBRID EV-GAS (MHEV)
- E300 | 2017-2019 | 4Matic, Base | 4 Cyl 2.0 L GAS
- E350 | 2020-2023 | 4Matic, Base | 4 Cyl 2.0 L GAS
- E400 | 2017-2018 | 4Matic, Base | 6 Cyl 3.0 L GAS
View More
View related parts
Mercedes-Benz Release Cable
Part Number: 222-880-63-02-64
$29.28 MSRP: $40.00
You Save: $10.72 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hood Cable; Release Cable
- Replaces: 222-880-01-59, 222-880-63-02
Fits the following Mercedes-Benz Models:
- S450 | 2018-2020 | 4Matic, Base | 6 Cyl 3.0 L GAS
- S550 | 2014-2017 | 4Matic, Base | 8 Cyl 4.7 L GAS
- S550e | 2015-2017 | Base | 6 Cyl 3.0 L PLUG-IN HYBRID EV-GAS (PHEV)
- S560 | 2018-2021 | 4Matic, Base | 8 Cyl 4.0 L GAS
- S560e | 2019-2020 | Base | 6 Cyl 3.0 L PLUG-IN HYBRID EV-GAS (PHEV)
- S600 | 2015-2017 | Base | 12 Cyl 6.0 L GAS
- S63 AMG | 2014-2021 | 4Matic, Base | 8 Cyl 4.0 L GAS, 8 Cyl 5.5 L GAS
- S65 AMG | 2015-2020 | Base | 12 Cyl 6.0 L GAS
View More
View related parts
Mercedes-Benz Release Cable
Part Number: 447-750-01-59
$29.28 MSRP: $40.00
You Save: $10.72 (27%)
ADD TO CART
Product Specifications
- Other Name: Hood Cable; Release Cable
Fits the following Mercedes-Benz Models:
- Metris | 2016-2023 | Base | 4 Cyl 2.0 L GAS
View related parts
Mercedes-Benz Release Cable
Part Number: 172-880-00-59-64
$32.33 MSRP: $44.50
You Save: $12.17 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hood Cable; Release Cable
- Replaced by: 172-880-08-02-64
- Replaces: 172-880-00-59
Fits the following Mercedes-Benz Models:
- SLC300 | 2017-2020 | Base, Final Edition | 4 Cyl 2.0 L GAS
- SLC43 AMG | 2017-2020 | Base, Final Edition | 6 Cyl 3.0 L GAS
- SLK250 | 2012-2015 | Base | 4 Cyl 1.8 L GAS
- SLK300 | 2016 | Base | 4 Cyl 2.0 L GAS
- SLK350 | 2012-2016 | Base | 6 Cyl 3.5 L GAS
- SLK55 AMG | 2012-2016 | Base | 8 Cyl 5.5 L GAS
View More
View related parts
Mercedes-Benz Release Cable
Part Number: 221-880-02-59-64
$31.11 MSRP: $42.50
You Save: $11.39 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Engine Hood Release Cable; Release Cable
- Replaces: 221-880-02-59
Fits the following Mercedes-Benz Models:
- CL550 | 2007-2014 | 4Matic, Base | 8 Cyl 4.7 L GAS, 8 Cyl 5.5 L GAS
- CL600 | 2007-2014 | Base | 12 Cyl 5.5 L GAS
- CL63 AMG | 2008-2014 | Base | 8 Cyl 5.5 L GAS, 8 Cyl 6.3 L GAS
- CL65 AMG | 2008-2014 | Base | 12 Cyl 6.0 L GAS
- S350 | 2012-2013 | Bluetec 4Matic | 6 Cyl 3.0 L DIESEL
- S400 | 2010-2013 | Hybrid | 6 Cyl 3.5 L FULL HYBRID EV-GAS (FHEV)
- S550 | 2007-2013 | 4Matic, Base | 8 Cyl 4.7 L GAS, 8 Cyl 5.5 L GAS
- S600 | 2007-2013 | Base | 12 Cyl 5.5 L GAS
- S63 AMG | 2008-2013 | Base | 8 Cyl 5.5 L GAS, 8 Cyl 6.3 L GAS
- S65 AMG | 2006-2013 | Base | 12 Cyl 6.0 L GAS
View More
View related parts
Mercedes-Benz Release Cable
Part Number: 222-880-62-02-64
$31.11 MSRP: $42.50
You Save: $11.39 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hood Cable; Release Cable
- Replaces: 222-880-00-59, 222-880-62-02
Fits the following Mercedes-Benz Models:
- S450 | 2018-2020 | 4Matic, Base | 6 Cyl 3.0 L GAS
- S550 | 2014-2017 | 4Matic, Base | 8 Cyl 4.7 L GAS
- S550e | 2015-2017 | Base | 6 Cyl 3.0 L PLUG-IN HYBRID EV-GAS (PHEV)
- S560 | 2018-2020 | 4Matic, Base | 8 Cyl 4.0 L GAS
- S560e | 2019-2020 | Base | 6 Cyl 3.0 L PLUG-IN HYBRID EV-GAS (PHEV)
- S600 | 2015-2017 | Base | 12 Cyl 6.0 L GAS
- S63 AMG | 2014-2020 | 4Matic, Base | 8 Cyl 4.0 L GAS, 8 Cyl 5.5 L GAS
- S65 AMG | 2018-2020, 2015 | Base | 12 Cyl 6.0 L GAS
View More
View related parts
Mercedes-Benz Release Cable
Part Number: 231-880-17-02-64
$28.06 MSRP: $38.50
You Save: $10.44 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hood Cable; Release Cable
- Replaces: 231-880-02-59, 231-880-17-02
Fits the following Mercedes-Benz Models:
- SL400 | 2015-2016 | Base | 6 Cyl 3.0 L GAS
- SL450 | 2017-2020 | Base | 6 Cyl 3.0 L GAS
- SL550 | 2013-2020 | Base | 8 Cyl 4.7 L GAS
- SL63 AMG | 2013-2019 | Base | 8 Cyl 5.5 L GAS
- SL65 AMG | 2013-2018 | Base | 12 Cyl 6.0 L GAS
View More
View related parts
Mercedes-Benz Release Cable
Part Number: 232-880-79-01
$24.40 MSRP: $33.50
You Save: $9.10 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hood Release Cable; Release Cable
Fits the following Mercedes-Benz Models:
- SL55 AMG | 2022-2023 | 4Matic | 8 Cyl 4.0 L GAS
- SL63 AMG | 2022-2023 | 4Matic | 8 Cyl 4.0 L GAS

| Page 1 of 5 |Next >

1-20 of 85 Results

Mercedes-Benz Hood Release Cable

Every part of the automobile matters, and their maintenance is crucial for the health of your vehicle. Moreover, a faulted Mercedes-Benz Hood Release Cable can impact its functionality as well as lead to system-wide problems that may endanger safety. Thus, it is imperative that one repairs or replaces failing parts for better driving experiences. Why go for OEM Mercedes-Benz Hood Release Cables? Because they are the optimal solutions, fit your vehicle perfectly, and are easy to install. Therefore, these factors help maintain the dependability and performance of your vehicle. At MBPartsGiant.com, you may find all the required genuine parts for your Mercedes-Benz. They are delivered from authorized Mercedes-Benz dealers directly via an uncomplicated online catalog. We guarantee promptness, reliability, and cheap sales on the Mercedes-Benz Hood Release Cable, and we always provide you with the right part at any time. Depend on our genuine Mercedes-Benz Hood Release Cables to keep your vehicle running smoothly.

Mercedes-Benz Hood Release Cable Parts and Q&A

Release Cable
201-880-02-59
Q: How to remove and refit of the Hood Release Cable on Mercedes-Benz 190E?
A:
In order to disassemble the part, release the locking stud on the front panel adjacent to the support strut and remove the cover underneath the lock. In cars which have air conditioning, screw the two screws and position the fan and undo the four clips that are at the top, and push the radiator back to give easy access. The next step is to un-hook the hood release cable at the support bracket and lock lever. Interior Take out the cover of the facia on the left-hand side and screw, and release handle undone and cable disconnected. Pull the rubber grommet at the cable exit point on the bulkhead, and then tie a string to the hood release cable such that it will drag the string through as one draws it out. Draw the cable forward and see the drawstring and when it comes in sight undo it and pull the cable out of the car. When refitting, take the opposite steps of the removal one, and use the string to help the new cable through the bulkhead into the car.
Release Cable
203-880-04-59
Q: How to remove and install the Hood Latch and Hood Release Cable on Mercedes-Benz C230?
A:
Open the hood to the normal position and draw a mark around both lower latches for alignment before detaching the latch retaining bolts from the radiator support, marking the latch position as you remove the latches; if working on the passenger-side latch, disconnect its electrical connector. Disengage the hood release cable from the latches, then mark the position of the safety catch on the hood and remove its mounting bolts. For the cable, disconnect it from the latch assembly and remove the lower left cover from the instrument panel. In the left rear corner of the engine compartment, detach the fuse and relay box without disconnecting any electrical connectors. Attach a piece of stiff wire to the end of the cable, trace it back to the firewall, and detach all cable retaining clips, noting the two sections with a connector at the left front corner of the engine compartment. In the passenger compartment, disconnect the cable from the hood release lever and pull the old cable into the compartment until the stiff wire is visible. Remove the old grommet from the cable hole in the firewall, ensuring the new cable has a grommet, then detach the old cable from the wire and attach the new one. From the engine compartment side, pull the wire through the cable hole, and during installation, push the grommet into place from the passenger compartment, ensuring it is fully seated in the firewall hole.

Related Mercedes-Benz Parts

Browse by Model